User manual PHILIPS FW-C390

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] Note: ­ When MAX sound is selected, all other sound navigation will switch off automatically. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. automatic DSC-DBB selection The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. The selected disc tray, total number of tracks and the playing time will appear on the display. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed. To play the selected disc only G In CD mode, press DISC 1/2/3 (or CD DIRECT 1/2/3 on the remote control). The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. You can select and change the various play modes before or during playback. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. To select a desired track G Press í or ë repeatedly until the desired track is displayed. Note: ­ In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once. Notes: ­ During programme play or shuffling mode, it is not possible to repeat playback the current disc (Repeat Disc mode). G Press Ç once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. The total number of tracks programmed and the total playing time are displayed. [. . . ] Notes: ­ When the preset time is reached and the selected disc tray is empty, the next available disc will be selected. if all the disc trays are not available , Tuner will be selected automatically. ­ During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. The selected source will be lighted while other available sources are flashing. [. . . ]