User manual PHILIPS FW-C330

[. . . ] Q The lens may cloud over when the system is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates. Q The mechanical parts of the set contain selflubricating bearings and must not be oiled or lubricated. q When the system is switched to Standby mode , it is still consuming some power. [. . . ] If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. Notes: ­ When the power is turned on, the disc tray may open and close to initialise the system. If no stereo frequency is detected during Plug and Play , "CHECK ANTENNA" will be displayed. ­ During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode. Note: ­ If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power standby or standby mode. DIM mode Brightness normal half half normal Spectrum Analyser off on off on To listen through the headphones q Connect the headphones plug to the n socket at the front of the system. You can manually select the DBB setting that best suits your listening environment. DSC (Digital Sound Control) The DSC feature enables you to enjoy special sound effects that have preset equaliser settings, providing the best music reproduction. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by MW band. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. To store the radio station to another preset number q Press í or ë to select the desired preset number. Notes: ­ If you attempt to store more than 40 preset radio stations, "FULL" is displayed. ­ During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically. ­ Before playing a tape, check and tighten slack tape with a pencil. ­ Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV or speaker). ­ Recording is permissible if copyright or other rights of third parties are not infringed upon. [. . . ] To deactivate the sleep timer q Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. Specifications and external appearance are subject to change without notice. Cleaning the Cabinet q Use a soft cloth slightly moistened with a mild detergent solution. do not use a solution containing alcohol , spirits , ammonia or abrasives. [. . . ]