User manual PHILIPS FW-C280

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" appears on the display instead of the total playing time. ­ If the system is reading the discs, programming is not possible, "READING" will be displayed and followed by "DISC X". ­ During programming, if no button is pressed within 20 seconds, the system will exit programme mode automatically. ­ "SELECT A DISC" will be displayed when programming an empty disc slot. You can change the outer two discs while the third inner disc is stopped or is playing. ¶ If you wish to change the inner disc during playback, press DISC CHANGE again. The CD changer tray will close to retrieve the inner disc and then open again with the inner disc accessible. Selecting a desired track when playback is stopped Press í or ë until the desired track appears on the display. The selected track number and elapsed playing time appear on the display. Selecting a desired track during playback ¶ Press í or ë until the desired track appears on the display. The selected track number and elapsed playing time appear on the display. ¶ If you press í once it will skip to the beginning of the current track and play the track again. Note: ­ Pressingí during shuffling can only skip to the beginning of the current track. The track number and elapsed playing time of the current track will appear on the display. ¶ If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly. Notes: ­ If you press any of the DISC DIRECT PLAY buttons, the system will play the selected disc and the stored programme will be ignored temporarily. In shuffle mode, the system plays all the available discs and their tracks in random order. ¶ The discs and the tracks will be played in random order until you pressÇ. ¶ If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the CD changer tray is opened. You can play the current track, a disc or all available discs repeatedly. ¶ The selected track, selected disc or all available discs will now be played repeatedly until you pressÇ. [. . . ] Before the system switches to standby mode, a countdown of 10 seconds will be displayed. While SLEEP mode is activated ¶ Press SLEEP once to view the remaining length of time. The display will show the remaining time followed by the sequence of sleep timer options. To switch off the Sleep Timer ¶ Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY-ON button. [. . . ]