User manual PHILIPS FA931

[. . . ] Select a repeat play option. DISC MENU OPTIONS Basic play control / OK BACK STOP / SUBTITLE GOTO AUDIO VOLUME REPEAT/REPEAT A-B 8 EN FA931_58_UM_V1. 3. indb 8 2012/5/29 10:47:38 During video play, press OPTIONS to access the following options. • [Aspect ratio]: Select a picture display format to fit the TV screen. • [Angle]: Select a camera angle from which video is viewed. During play, press REPEAT/REPEAT A-B repeatedly to select a repeat play option. To Repeat play for a specific section 1 2 3 Press REPEAT/REPEAT A-B repeatedly to select as a start point. [. . . ] / to / OPTIONS If necessary, repeat step 2 and 3 to complete the input of a title, chapter, or track number. »» The play skips to the selected title, chapter or track. EN 9 OK FA931_58_UM_V1. 3. indb 9 2012/5/29 10:47:39 English Video options Repeat play DivX videos You can play DivX videos from a disc or a USB storage device. VOD code for DivX • Before you purchase DivX videos and play them on this player, go to vod. divx. com to register this player using the DivX VOD code. • Display the DivX VOD code: press , and select [Setup] > [General] > [DivX(R) VOD Code]. • If subtitles are not displayed correctly, change the character set that supports DivX subtitles. Select a character set: press , and select [Setup] > [Preferences] > [DivX Subtitle]. Character set [Standard] Languages English, Albanian, Danish, Dutch, Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish, Swedish, and Turkish Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene, and Serbian Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian, and Ukrainian Greek Use Philips EasyLink This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 2 3 4 Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details). Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby]. »» EasyLink function is turned on. [Central Europe] [Cyrillic] [Greek] Note One Touch Play When you play a disc on this player, the TV automatically switches to the correct video input source. Select [Setup] > [Preferences] to access the preference setup options. • [Parental Control]: Restrict access to discs that are encoded with ratings. Input "136900" to access the restriction options: When the password field is highlighted, press OK to enter an input stage, press to select a digit and press / to change a digit position. • [Password]: Set or change a password to play a restricted disc. Input "136900" if you do not have a password or if you have forgotten your password • [DivX Subtitle]: Select a character set that supports the subtitle of your DivX video. • [Default]: Reset all settings to the factory default, except for the settings for [Disc Lock], [Parental Control] and [Password]. Note •• If your preferred language is not available for disc language, audio or subtitle, you can select [Other] from the menu options and input 4-digit language code which can be found at the back of this user manual. If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www. philips. com/support. If you contact Philips, you will be asked for the model and serial number of this player. • The TV video input channel is not correctly selected (see the TV's user manual). • If you have changed a TV system setting, switch back to the default setting: 1) Press to open the disc compartment. [. . . ] • If the connected device is non-HDCP compliant or only DVI-compatible, no sound can be heard from the HDMI output. 14 EN FA931_58_UM_V1. 3. indb 14 2012/5/29 10:47:44 • No sound during DivX video playback. No audio output from the loudspeakers of the connected external audio device (for example, stereo system, amplifier receiver). • Make sure that the audio cables or coaxial cable are correctly connected. • Switch the external audio device to correct audio input source. [. . . ]