User manual PHILIPS DVDR75-001

[. . . ] Digital Video Disc Recorder Owner's Manual DVDR75 ® Important!REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF THE FEATURES. PHILIPS CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT. 1-800-531-0039 OR VISIT US ON THE WEB AT WWW. PHILIPS. COM Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. [. . . ] On a DVD+R, resume play from the Disc Pointer location by pressing OK. However, on a DVD+R, recording begins at the last empty title space when you press REC/OTR I. Title Settings Menu When you select an Index Picture, press : to go to its Title Settings Menu. You can name, play, or erase the Title. See page 47. Title description Includes program name (or channel/source and time at which it was recorded), length of recording, the speed in which it was recorded, and the date of recording (if clock was set). Cue Go to the Disc Information Screen or to a Title on a previous screen. Index Picture An image representing a recording. An empty box represents an area on the Disc that is empty and available for recording. Timer Information Box Displays the current time or the time/date of the next scheduled timer recording. Tuner Information Box Displays the current TV channel or video source (if additional equipment is connected to the Recorder). M1 Disc Pointer Shows the current Title number and its position within the Disc. M1 Sun 06/15/2003 Sun 10/26/2003 Information Boxes 33 Warning box Appears near the bottom of the screen when appropriate. Examples and details are on page 45. Disc locked Tuner Information box Appears briefly on the left side of the TV screen in Monitor mode and identifies the current TV channel or Video source. For example, if EXT1 appears in the Tuner Information Box, you can view or record the material playing on the equipment connected to the IN EXT1 jacks on the rear of the Recorder. Make sure you have connected an Antenna or Cable TV signal to the ANTENNA jack on the Recorder. Press MONITOR to go into Monitor mode and view TV channels or play video from other equipment. Current TV channel No signal - Channel is not receivable or no equipment is connected to the designated jack. Copy-protected signal 012 Timer Information box 012 Displays the start time or date of the next scheduled timer recording and appears in the Index Picture Screen. You cannot remove it from the Index Picture Screen. Timer recording due later today Timer recording set for another day within the upcoming year 4 The time at which the current One-Touch Recording will end. Current time; no timer recordings are scheduled. 10:15 pm 34 Title/Disc Menus, Chapter/Track Selection Title/Disc menus 1 2 Press DISC MENU during Disc play. For a DVD, if the current Title has a menu, the Title menu will appear on the screen. Otherwise, the Disc menu will appear. The menu will list features available on the current DVD and will vary for every DVD. Press CH+8, CH-9, ;, and : to select items in the menu or Index Picture Screen, then press OK. Repeat this process until you set up all the features you want or until play begins. STANDBY MONITOR TV / DVD T/C PLAY MODE REC. MODE 1 4 2 3 6 9 SYSTEM 5 1 7 DISC 8 0 MENU SELECT OK CH 2 CH TIMER FSS RETURN CLEAR TV VOLUME PLAY Chapter/Track Selection STANDBY MONITOR 1 2 Press Next G during play to go to the next Track/Chapter. [. . . ] For one year thereafter, all parts will be repaired or replaced, and labor is free. After one year from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the product expires, the warranty on all replaced and repaired parts also expires. Your warranty does not cover: · labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. [. . . ]