User manual PHILIPS DTR320

[. . . ] NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 1 NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 2 Welcome to digital television Congratulations on choosing the PHILIPS DTR 320 digital terrestrial receiver, which will allow you to access Freeview digital terrestrial television, radio and interactive channels. With this product, you can enjoy advanced functions and features including: - Award-winning noise-free reception - Automatic programme installation - Wide screen format - TV SCART and VCR/DVD SCART connectors - Personal channel list and favourite lists - Electronic Programme Guide PHILIPS have made every effort to ensure this product meets your every day needs for years to come. This User Manual covers the installation of your receiver, together with explanations of the standard and unique features of the product. English Lucas Covers Paris, March 2005 Meaning of symbols Important information: Must be read and understood. [. . . ] Repeat this step as many times as necessary to access the desired option. Note: press <BACK> to go back one level in the menu. CHANGING THE SETTINGS OF YOUR RECEIVER 17 English NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 18 - Scroll to the setting you want to change. The corresponding values are displayed on the right-hand side of the screen. English Note: if the parental control is active, you must enter your PIN code to access the relevant sub-items of this menu. 5. 2. 2 Location Location is selected in the Preferences submenu. This item is used to select the country where you operate your receiver and corresponding time zone. - Scroll to the setting you want to change. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the settings. 5. 2. 3. 1 TV This item is used to select the format of the output signal for the TV and VCR SCART sockets. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values: · Video Output: RGB, CVBS-PAL, or Y/C. · Audio Output: Stereo or Mono · Screen format: select the aspect ratio of the video output that best suits your TV. Note: it is recommended to use the RGB setting to get the best video quality on the TV screen. 5. 2. 3 System settings System settings is selected in the Preferences sub-menu. - Press the ibutton to access the system settings. 18 CHANGING THE SETTINGS OF YOUR RECEIVER NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 19 5. 2. 3. 2 VCR This item is used to select the format of the output signal for the VCR SCART socket. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values: · Video Output: CVBS-PAL, or Y/C. English 5. 2. 3. 5 Volume This item is used to select the volume level at start-up. 5. 2. 3. 6 Remote Control This item is used to set the remote control address. If you do not complete the procedure as described in paragraph 7. 1, you will not be able to control your receiver using your remote control. 5. 2. 3. 3 Digital audio output Select AC3 (digital audio 5. 1) only if your receiver is connected to a Dolby Digital home entertainment system. 5. 2. 3. 4 Channel Banner This item is used to select the channel banner display duration and transparency. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values. CHANGING THE SETTINGS OF YOUR RECEIVER 19 NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 20 5. 3 Installation - Press the <MENU> button to open the main menu. - Press the ibutton to access the Installation sub-menu. To uninstall a service you have selected from the installed services list: - Press the red colour button. The service is removed from the installed service list and appears in the uninstalled services list. To install a service you have selected from the uninstalled services list: - Scroll to the position where you want to install the service. - Press the green colour button. The service is removed from the uninstalled service list and appears in the installed services list. [. . . ] Press the "TIMER" and the "0" buttons successively to cancel the TIMER and unlock the receiver. Check the condition of the batteries and replace if necessary, according to instructions earlier in this manual. Try retuning your receiver, following the relevant steps in paragraph 5. 3. 2. Call your local dealer. No picture, no sound, but the front panel red LED is on. Your receiver is in Standby mode. No picture, no sound but the front panel the left hand LED is on. [. . . ]