User manual PHILIPS DC220

[. . . ] For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www. eiae. org. r Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning · · · · · Never remove the casing of this apparatus. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. Notice Anychangesormodificationsmadetothisdevicethatarenot expressly approved by Philips Consumer Lifestyle may void the user's authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. [. . . ] p DC IN · Power supply socket. 3 Get started Caution · Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Connect power Caution · Risk of product damage!Ensure that the power voltage corresponds · Risk of electric shock!When you unplug the AC adaptor, always pull · Before connecting the AC adaptor, ensure you have completed all other connections. to the voltage printed on the back or underside of the apparatus. 1 2 Connect one end of the AC adaptor to the DC IN socket on the main unit. Connect the other end of the AC adaptor to the wall outlet. Note · The voltage and power rating information is located on the bottom of the unit. Set time and date 1 2 Dock the iPod / iPhone on the unit. » Time and date information on the iPod / iPhone transfers to the unit automatically. To set time and date manually: 1 In standby mode, press and hold DATE · AUTO TUNE/TIME SET for 2 seconds. » [24 HR] begins to blink. 2 3 4 5 6 1 PressTUNING +/- or / to select 12/24 hour format. Repeat steps 4-5 to set the minute, year, month, and day. Turn on Press POWER. » The unit switches to the last selected source. Switch to standby 1 Press POWER again to switch the unit to standby mode. » The time and date (if set) appear on the display panel. 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone Apple iPod and iPhone models with a 30-pin dock connector: · iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. · iPhone, iPhone 3G, iPhone 3GS. Listen to the iPod/iPhone 1 2 Place the iPod/iPhone into the dock. · To search during play, press and hold / , then release to resume normal play. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. Tip · For certain iPod models, it may take up to a minute before the charging indication appears. Play from an external device You can also listen to an external audio device through this unit. 2 Connect the supplied MP3 link cable to: · the MP3 LINK jack (3. 5mm) on the back of the unit. 3 Start to play the device (see the device user manual). 5 Listen to radio Note · Only FM radio reception is available on this unit. Tune to a radio station Tip · Position the antenna as far as possible from TV, VCR or other radiation source. Note · For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE to select FM. 2 3 Press and hold TUNING +/- for more than 2 seconds. » The radio tunes to a station with strong reception automatically. · To tune to a weak station, press TUNING +/- repeatedly untilyoufindoptimalreception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold DATE · AUTO TUNE/TIME SET for more than 2 seconds to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. [. . . ] » If DBB is de-activated, [DBB 0] is displayed. 8 Product information Note · Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio MP3 link 2 x 2. 5 W RMS 125 Hz - 16 kHz, ±3 dB >55 dB 500 mV RMS 10 kohm Tuner FM Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87. 5 - 108 MHz 50 KHz <22 dBu <45 dBu <36 dBu <3% >45 dB General information AC power (power adaptor) AS190-090-AE180; Input: 100-240 V~, 50/60Hz, 0, 7 A; Class II; Output: 9. 0V 1. 8A 10 W <1 W 216. 9 x105 x139. 4 mm 0. 75 kg Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - Main Unit 9 Troubleshooting Warning · Never remove the casing of this apparatus. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips. com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. [. . . ]