User manual PHILIPS CDC775-00G

[. . . ] Compact Disc Changer CDC775 1 Untitled-19 1 6/15/00, 1:34 PM 3139 116 17401 Important notes for users in the U. K. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] The searching speed is determined by how long a key is pressed: ­ the first 2 seconds fairly slowly, with sound; ­ then at the maximum speed, with no sound. CDC775/22-Eng 6/15/00 1:37 PM Page 11 PLAYBACK All CDs: · Press SHUFFLE before or during play. ­ SHUFFLE lights up and all the tracks are now played in a random order. TRACK TRACK TIME TRACK TOT TIME 1 3 2 1 3 SHUFFLE ­ If you press T, you will select any one of the following tracks. · Press SHUFFLE again if you wish to return to normal play. During play: 1. Time display ­ When you start play (from STOP mode), the display shows the elapsed playing time of the current track (= default display in PLAY mode). TRACK TRACK TIME · If you wish to know the total playing time of the entire CD you must go back to STOP mode first and then press TIME. ­ The display now shows the number of tracks and the total playing time of the current CD (TOTAL TIME). 1 Repeating Play (REPEAT) · Press TIME whenever you want to know the remaining playing time of the current track (REM TRACK TIME). TRACK REM TRACK TIME NOTE!­ If, during play, you open the CD compartment to change CDs (see 'NORMAL PLAYBACK') then playback in random order will be cancelled. Playback will stop as soon as the last track of the current CD has been played (in normal order). 1 Repeating a track: · Press REPEAT before or during playback of the CD. ­ REPEAT 1 lights up; the track will now be repeated continuously. TRACK TRACK TIME 1 · Press TIME, if you wish to know the total playing time from the beginning (TOTAL TIME). TRACK TOT TIME REPEAT 1 Calling Up Information On Display (TIME) In STOP mode: Text display ­ After loading the CDs and closing the CD compartment, the display shows the number of the CD to be played (= default display in STOP mode). 3 2 1 · Press REPEAT three times to stop the track being repeated. Repeating a CD: · Press REPEAT twice before or during playback of the CD. ­ REPEAT DISC lights up; the CD will now be repeated continuously. TRACK TRACK TIME 1 · Press TIME again if you wish to know the remaining playing time of the entire CD (TOTAL REM TIME). TRACK TOT REM TIME 1 1 Note : ­ TOTAL REM(aining) TIME and TOTAL TIME indications are not available in SHUFFLE mode. REPEAT DISC · Press REPEAT twice to stop the CD being repeated. 11 English Playing In Random Order (SHUFFLE) · Press TIME to shows the number of tracks and the total playing time of the current CD (TOTAL TIME). 2. Text display · If you press TIME again, you will switch to text display; the display shows the number of the current CD. CDC775/22-Eng 6/15/00 1:37 PM Page 12 PLAYBACK Note: ­ Repeating of a CD is not possible during shuffle or program mode. Repeating all CDs: · Press REPEAT three times before or during playback. ­ REPEAT lights up; all CDs will now be repeated continuously. TRACK TRACK TIME ­ When the loudest passage has been found it will be repeated continuously (from 2 seconds before the peak until 2 seconds after the peak) and PEAK lights up. · You can stop the scan by pressing STOP 9: if you press PLAY 2, the CD will be played from the beginning. Locking the volume This unique feature allows you to lock the volume level when listening to the heaphones or doing recording. ­ The displays will show VOL 20. English 12 1 REPEAT · Press REPEAT again to stop the CDs being repeated. NOTE!­ When a program has been stored (for one or more CDs), then only the program will be repeated. NOTES!­ When searching for the loudest passage in a program (from one or more CDs) there is no need to enter the CD number(s). ­ If you wish to record tracks from different CDs you have to repeat peak search for each CD. ­ You can interrupt PEAK SEARCH by pressing STOP 9. Note: ­ When you adjust the volume and the display shows VOL LOCK, it means that the volume is in the lock mode. Listening to the heaphones · Connect the headphones to the PHONES socket. · Adjust the headphones sound level with the LEVEL control. Searching For The Loudest Passage (PEAK SEARCH) · In STOP mode, press PEAK SEARCH. · Press PEAK SEARCH again to select the last selected disc or press any CD DIRECT PLAY button or DISC (on the remote control) to select the desired disc. ­ The display shows the track being scanned and its elapse playing time. TRACK PEAK TRACK TIME Adjusting The Sound Level (- VOLUME +) (on the remote control only) The volume output of the CD changer can be adjusted. ­ The display will show a value between VOL 0 and VOL 20. Note: ­ Should there be no sound after adjusting the LEVEL control to maximum; press VOLUME + on the remote control to increase the sound level. 1 Important! [. . . ] This can also be done after selecting the recording mode and the recording time. See below. 1 ­ After the last track that fits on side A of the tape, the CD changer will go into PAUSE mode. ­ Under TRACK you will see the number of the first track to be recorded on side B of the tape. TRACK TOT TIME 1 PAUSE · Turn the tape over or select the tape travel direction for side B. CDC775/22-Eng 6/15/00 1:37 PM Page 15 EDIT · Press PLAY 2. ­ The remaining tracks will now be played. ­ After the last track play will stop; EdIt CANCELLEd lights up. ADDITIONAL INFORMATION The CDs · Never write on the printed side of a CD. [. . . ]