User manual PHILIPS BDP2500

[. . . ] Register your product and get support at www. philips. com/welcome BDP2500 EN User manual Important notes for users in U. K. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). If the fuse is lost, contact your dealer in order to verify the correct type. In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord. [. . . ] [VCD PBC] Turn on or off the content menu of VCDs/SVCDs with PBC (playback control) feature. · [Off] - Skip the menu and start play from the first title. EasyLink Setup 1 2 3 Press . Select [EasyLink Setup], then press . EasyLink One Touch Play Audio Setup One Touch Standby On On On Video Setup Preference Setup EasyLink Setup Advanced Setup 4 5 Select an option, then press OK. · To return to the previous menu, press · To exit the menu, press . BACK. [EasyLink] This product supports Philips Easylink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control all EasyLink-compliant devices that are connected through HDMI connectors. [One Touch Play] When you press the STANDBY button to turn on this product, the TV (if the TV supports onetouch play) automatically turns on and switches to the video-in channel. [One Touch Standby] When you press and hold the STANDBY button on the remote control, all the connected HDMI CEC devices (if the device supports one-touch standby) switch to standby mode simultaneously. Note · You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. · Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. Advanced Setup 1 2 3 Press . Select [Advanced Setup], then press . 4 5 Select an option, then press OK. [Software Download] Update the software of this product (if a latest version is available on Philips website) to enhance the playability of this product. · [USB] - Download software from the USB device which is connected to this product. Note · For detailed software updating, see "Additional information" > "Update software". [Clear Memory] Remove some Blu-ray disc data (such as BonusView) that are automatically copied on the connected USB device. Tip · On the connected USB device, a folder named "BUDA" is automatically created to store some necessary data from Blu-ray disc. [DivX® VOD Code] Display the DivX® registration code. Tip · Use this product's DivX registration code when you rent or purchase video from www. divx. com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered. [Version Info. ] Display the software version and the MAC address of this product. Tip · This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this product. [Restore Default Settings] Reset all the settings of this product to the factory settings, except for [Parental Control] setting. 7 Additional Information Update software For software updates to enchance performance, check the current software version of this product to compare with the latest software (if available) at the Philips website. 3 Select [Advanced Setup] > [Version Info. ], then press OK. Update software via USB 1 2 3 4 5 6 Go to www. philips. com/support to check if the latest software version is available for this product. In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [USB]. » Once software update is complete, this product automatically turns off to standby. Disconnect the power cord for a few seconds and connect again to turn on this product. Note · Do not turn off the power or remove the USB flash drive when software updating is in progress to prevent possible damage of this product. Care Caution · Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs. Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement. 8 Specifications Note · Specification and design are subject to change without notice Video · Signal system: PAL / NTSC · Composite video output: 1 Vp-p (75 ohm) · HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24 Audio · 2 Channel analog output · Audio Front L&R : 2 Vrms (> 1 kohm) · Digital output: 0. 5 Vp-p (75 ohm) · Coaxial · HDMI output · · Sampling frequency: · MP3: 32 kHz, 44. 1 kHz, 48 kHz · WMA: 44. 1 kHz, 48 kHz Constant bit rate: · MP3: 112 kbps - 320 kpbs · WMA: 48 kpbs - 192 kpbs USB · As additional memory for software updates and BonusView contents. Main unit · Power supply rating · Europe: 220~240V ~AC, ~50 Hz · Power consumption: 25W · Power consumption in standby mode: < 1 W · Dimensions (w x h x d): 360 x 54 x 240 (mm) · Net Weight: 2. 5 kg Accessories supplied · Remote control and batteries · Audio/Video cables · User manual Laser Specification · Laser Type: · BD Laser Diode: InGaN/AIGaN · DVD Laser Diode: InGaAIP · CD Laser Diode: A IGaAs · Wave length: · BD: 405 +5nm/-5nm · DVD: 650 +13nm/-10nm · CD: 790 +15nm/-15nm · Output power: · BD: Max. [. . . ] Such upgrades may be made available pursuant to the terms of this Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement. Philips is not obligated to provide technical or other support ("Support Services") for the Software. If Philips does provide you with Support Services, these will be governed by separate terms to be agreed between you and Philips. Philips provides the Software `as is' and without any warranty except that the Software will perform substantially in accordance with the documentation accompanying the Software for a period of one year after your first download, installation or use of the Software, whichever occurs first. [. . . ]