User manual PHILIPS AJ3138

[. . . ] Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Safety i j k l m Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Battery usage CAUTION ­ To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: · Install all batteries correctly, + and - as marked on the unit. [. . . ] Display panel radio · Turn on/off the radio. d e f g h i Battery compartment Antenna (Inside the battery compartment) DC IN jack set/scan · Set the clock. sleep · Set sleep timer. j k l m n o 3 Get started Caution · Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Install batteries Caution · Riskofexplosion!Keepbatteriesawayfromheat, sunshineorfire. When the apparatus is not used for long · Batteries contain chemical substances, so they should be disposed of properly. Neverdiscardbatteriesinfire. 1 2 » 3 Open the battery compartment. Insert 3 AAA batteries (not supplied) with correct polarity (+/-) as indicated. Close the battery compartment. Tip · When the unit is powered by battery, the screen lights up for 5 seconds after any operation. Connect power Caution · Risk of product damage!Ensure that the power voltage corresponds · Risk of electric shock!When you unplug the AC adaptor, always pull · Before connecting the AC adaptor, ensure you have completed all other connections. to the voltage printed on the back or underside of the apparatus. 1 Connect the power cord to · the DC IN jack on the back of the main unit · the power socket. Set time and date » 1 2 3 4 5 6 7 8 In clock mode, press set/scan. Repeat steps 2-3 to set the month-day display mode. 4 1 2 Listen to radio Press radio to turn on the radio. Rotate tuning clockwise or counter-clockwise to tune to a radio station. Tune to a radio station Program radio stations automatically Note · You can program a maximum of 20 preset radio stations. » » 1 2 Press radio repeatedly to turn on the radio. All available stations are programmed in the order of waveband reception strength. Thefirstprogramedradiostationbroadcastsautomatically. Program radio stations manually Note · You can program a maximum of 20 preset radio stations. 1 2 » 3 4 5 6 Press radio repeatedly to turn on the radio. Rotate tuning clockwise or counter-clockwise to tune to a radio station. Repeat the above steps to program more stations. Tip · To overwrite a programmed station, program another station in its place. Select a preset radio station 1 2 Press radio to turn on radio. [. . . ] The alarm rings after the set period of time. To turn off the nap timer 1 Press nap repeatedly until [OFF] is displayed. Record a piece of sound Note · You can record for a maximum of 8 seconds. » » 1 Press and hold rec/play during the whole process of recording. When the sound is recorded, Tip · Keep the sound source close to mic on the top of the unit. is displayed. Adjust the volume level 1 1 Rotate volume to increase/decrease the volume level. Adjust display brightness Press repeat alarm/brightness control repeatedly to turn on/ off the backlight of the display. Activate the backlight blinking function » » 1 Press and hold repeat alarm/brightness control for 5 seconds. When the alarm rings next time, the backlight blinks for 3 minutes. To deactivate the backlight blinking function 1 Press and hold repeat alarm/brightness control for 5 seconds again. Change the decorative ring and knobs Note · You can change the decorative ring and knobs with the supplied ring and knobs. To change the decorative ring 1 Rotate the ring counter-clockwise. [. . . ]