User manual PHILIPS 32PW9528

[. . . ] tv Information for users in the UK (Not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. General Points Please take note of the section 'Tips' at the end of this booklet. [. . . ] Personal refers to the personal preference settings of sound in the sound menu. Notes: - Some menu items are only available in case of a Cinema Link configuration and when the Cinema Link is activated. - Mono/Stereo is only selectable in case of analogue stereo transmission. - Nicam/Analogue is only selectable in case of Nicam transmission. Hall Surround Modes Dependent on your personal preference and the sound signal broadcasted, select one of the Surround modes. Only the speakers indicated in the drawings can reproduce sound. Stereo The sound signal is distributed over the rear loudspeakers which creates a hall effect from the rear. The centre loudspeaker does not reproduce any signal. Dolby Pro Logic This mode reproduces only the left and right front sound signals. Dolby 3 Stereo (optimal with Dolby Surround broadcasting) The Dolby Pro Logic* sounds are distributed over the front left, the front right and the centre TV loudspeakers. 3D Surround (optimal with Dolby Surround broadcasting) All front and rear loudspeakers reproduce the Dolby Surround Pro Logic sounds. This sound is always present in the movie or programme marked with G Dolby Surround. Note: · Normal stereo broadcast is not always encoded to produce a rear surround sound effect. · In case of a Cinema Link receiver configuration connected, only the surround modes of the external receiver can be selected. · Pro Logic and Hall can only be reproduced if Surround speakers is set to Yes in the Setup, Speakers menu, p. · When a headphone is connected, only the Surround mode Stereo-headphone is available. (optimal with Dolby Surround broadcasting) 3D Surround enables you to experience the 3D effect of Dolby Surround Pro Logic* without the need of having rear speakers connected or activated. The graphical representation of the rear loudspeakers is replaced by the symbol ®r. Select the level of 3D effect with the cursor left/right. * Dolby' `Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation. 12 Features menu Features TV Programme list Subtitle Sleeptimer Child lock On timer Zoom Off On On during mute Press the cursor right to select Features. Select the menu items with the cursor up/down and adjust the settings with the cursor left/right. Use the on-screen Menu-Info i for more information about the menu items. Programme list Press the OK key to switch over to the selected TV channel or external. Select subtitles The subtitle page must be stored for each TV channel: Switch on teletext and select the proper subtitle page from the index. Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission. Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the ¬ key on the remote control. On timer & Select On timer with the cursor down. VCR1 BBC2 CNN TVE . . . . . Lock Custom lock Unlock Age lock Lock after Programme lock Category lock Child lock é Press the cursor right to enter the Child lock menu. You're summoned to enter your code. Note:You have to re-enter your code each time you enter the child lock menu. Important:You have forgotten your code !10. " Select one of the menu items of the child lock On timer Off On 15:45 é Select On with the cursor right. [. . . ] Select an appropriate surround mode, according to the broadcasted sound signal or adjust the volume. 12. No picture No sound No Surround sound No solution found Switch your TV off and then on again once. Press the MENU key again to exit from the menu. No NEXTVIEW NEXTVIEW info: NEXTVIEW See Acquisition and updating of Displayed time is wrong: information, p. 17. The broadcaster on programme number one does not transmit the correct local date and time. [. . . ]