User manual PHILIPS 32HF7874

[. . . ] An inferior aerial is The aerial should be connected to the socket marked likely to result in a poor, perhaps unstable picture with ghost images and lack of contrast. Your dealer will know from experience the most suitable type for your locality. Should you wish to use the set in conjunction with other equipment, which connects to the aerial socket such as TV games, or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug. Fitting the stand (if provided) Use only the stand provided with the set, making sure that the fixings are properly tightened. [. . . ] Submenus can be accessed from menu items with a ">" symbol pressing the cursor right key. TELEVISION up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in menu mode and the television reacts the same way as in TV mode. Clock Setup: The Clock set-up menu can be entered from this menu item (this menu option is only available on certain LCD TV models). : The program type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO". If the program number of a certain type is 0, the corresponding type is not displayed. In order to display a program number of the above-mentioned types, always enter two numbers, for example: "01" for TV1 or digit "1" and up/down cursor. Some input sources may not be available on certain sets (see accompanying table). Model / Input 26HF5444 AV2 Side AV Side S-Video EXT4 HDMI Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 26HF7874 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 32HF7444 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 32HF7874 Scart1 Scart2 AV-In S-Video In YPbPr HDMI1 / CVBS HDMI2 37HF7444 Scart1 Scart2 Video In S-Video In YPbPr HDMI1 / CVBS HDMI2 Note: When a SmartCard XPress Box is used, it is usually connected to Scart1. Right cursor starts an auto search; during frequency entry the digits not yet entered are displayed as dashes "-". Label: This menu item will be used to add a label/name for each program. O Pressing the left/right buttons you may enter or exit the label field; pressing the up/down cursor you may insert alphanumeric characters. Store: The present program information is stored after pressing the cursor left/right button. Mute: This item enables/disables picture and sound for the particular channel. O NONE: normal picture and sound enabled o VIDEO: picture is blanked for this channel (e. Teletext Language: This menu enables the user to select the Teletext character set to be used for the selected channel. With cursor left/right you can select a letter corresponding to the different language clusters. O "WEST EU": Pan European (Latin) / West option o "EAST EU": Pan European (Latin) / East option (this menu option is only available on certain LCD TV models) o "GREEK": Greek o "CYRILLIC": Cyrillic (this menu option is only available on certain LCD TV models) · protection: This function indicates whether the selected program has a protection or not. With the cursor left/right keys the protection can toggle between "YES" and "NO". Switch On/OSD: In this submenu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected. [. . . ] Display Standby: This menu item will be used to set the intensity of the clock display when the television is in standby mode. Super Wide This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture Widescreen This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. Auto Format This TV set is equipped with automatic switching which will select the correct screen format, provided the specific signals are transmitted with the programs. If the word "LOW" appears instead of "OK", the batteries are low and must be replaced. [. . . ]