User manual PANASONIC VL-SWD501UEX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC VL-SWD501UEX. We hope that this PANASONIC VL-SWD501UEX user guide will be useful to you.


PANASONIC VL-SWD501UEX : Download the complete user guide (19222 Ko)

Manual abstract: user guide PANASONIC VL-SWD501UEX

Detailed instructions for use are in the User's Guide.

[. . . ] Product figure VL-MWD501EX VL-WD613EX VL-V554EX (surface mount)/ VL-V554UEX (flush mount) R The illustrations in the supplied manual(s) may vary slightly from the actual product. Caution: R Before attempting to connect or operate this product, please read the label on the rear of the main monitor. 1 Supplied accessories For the sub monitor Accessory item AC adaptor/ PNLV226CE*1 Quantity 1 AC adaptor/ PNLV226E*1 1 Rechargeable batteries 2 Charger 1 *1 Appropriately dispose of the AC adaptor that will not be used. Note: R Accessories for installing the main monitor and the doorphone are described in the supplied Installation Guide. [. . . ] : ® : Select the camera you want to ( ) – The monitoring time is about 3 minutes. R Making a warning sound come out of the camera: : Touch [Play sound]. : ( – – – ) ( )® : "Warning" ® ® [Warning sound] ® monitor with. 3 To end the operation, press Features available while monitoring – – – – Features available when a sensor is triggered Adjust wide/zoom and pan/tilt settings (® page 33) Adjust brightness settings (® page 34) Record monitored images (® page 20) Adjust wide/zoom and pan/tilt settings (® page 33) Adjust sound and display settings (® page 33) Make a warning sound come out of the camera (® page 24) Record monitored images (® page 20) Note: R Monitoring time: – : About 90 seconds (can be extended up to 3 minutes by performing operations during monitoring) – : About 3 minutes R In situations where it is difficult to see images, such as when it is dark or when there is backlight, change the camera’s [Brightness] setting and activate the [Backlight compensation] setting as required. (® page 27) Note: R Images from when camera sensors are triggered are automatically recorded to the SD card. (® page 25) R Once a sensor is triggered, the next sensor detection cannot be made until about 10 seconds after the first triggered images have finished being displayed. ® page 26) R In situations where it is difficult to see images, such as when it is dark or when there is backlight, change the camera’s [Brightness] setting and activate the [Backlight compensation] setting as required. (® page 27) R The volume and the types of sounds used by the [Warning sound] setting can be changed. 3 When camera sensors are triggered When a camera sensor is triggered, the main monitor and sub monitor are notified in the follow manner. 4 Turning off camera sensor detections for specified periods of time (main monitor only) Camera sensor detections can be turned off for specified periods of times as required. € When camera sensor detections are turned off, notifications are not sent to the main monitor and sub monitor and images are not automatically recorded. Note: R The setting function screen automatically quits if an incoming call is received or if no operations are performed for about 90 seconds. Item name: Sensor settings Function name Sensor selection Heat sensor detection*1 Setting contents and other information Heat sensor only, <Heat sensor + motion detection>, External sensor only, All sensors, Off (disables all sensors) <Night only>, Always R Select the time period for heat sensor detection. € When [Night only] is selected, the heat sensor operates according to the settings of [Day and night switch] (® page 26). Day only, <Always> R Select the time period for motion detection. € When [Day only] is selected, motion detection operates according to the settings of [Day and night switch] (® page 26). <Auto>, Timer R Select whether to automatically set the day and night switch settings or set them manually to a preferred time. € This setting is active when the [Heat sensor detection] or [Motion detection] settings are set to [Night only] or [Day only]. Auto: the camera automatically switches between night and day modes depending on the brightness of the surrounding area. (After selecting [Timer], set the time with [+] and [–], and then touch [OK]. ) Time with no detection <10 seconds>, 30 seconds, 60 seconds R Select the time after an image is detected by a sensor or a monitored image is displayed until the sensor can make detections again. € Select a long time period if you do not want the sensor to make frequent detections. [. . . ] R Because of the characteristics of the sensors, the camera may not be able to detect people moving towards the front of the camera. € Change the camera location so that objects pass the camera from the sides. (It is easier to detect objects moving sideways in front of the camera. ) – If you want to detect objects moving towards the front of the camera, use a commercially available external sensor. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC VL-SWD501UEX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC VL-SWD501UEX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.