User manual PANASONIC SC-NT10E

[. . . ] Book 2 ページ ２０１３年７月８日　月曜日　午前１０時３分 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Precautions ∫ WARNING Unit To reduce the risk of fire, electric shock or product damage, • Do not let water or other liquids drip or splash inside the unit. € Do not place objects filled with liquids, such as vases, on accessory. [. . . ] € If this unit is being used for the first time (factory preset state): The Bluetooth® indicator (blue) blinks fast. ] until the Bluetooth® indicator (blue) blinks • The unit will enter pairing standby. 3 Select “SC-NT10” from the Bluetooth® device’s Bluetooth® menu. € When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) on the unit lights up. € If the Bluetooth® device need to operate the Bluetooth® pairing setting and the Bluetooth® connecting setting, operate both settings. When the maximum or minimum volume is reached, you will be notified by a beep sound. Book 9 ページ ２０１３年７月８日　月曜日　午前１０時３分 Selecting Transmission mode setting You can change the transmission speed to prioritise sound quality or connectivity. ENGLISH VQT5A89 ∫ Sound Quality Priority MODE: While pressing and holding [ ], press and hold [VOL -] until the Bluetooth® indicator (blue) and the Boost Mode indicator (orange) blink once. ˆ Connectivity Priority MODE: While pressing and holding [BOOST], press and hold [VOL -] until the Bluetooth® indicator (blue) and the Boost Mode indicator (orange) blink once. 2 Press [Í/I] to turn this unit off, and press [Í/I] again to turn on. € The Bluetooth® connection is automatically established, and the Bluetooth® indicator (blue) lights up. Disconnecting Bluetooth® • Turn off this unit or the device. € (For NFC-compatible devices only) Touch and hold your device to NFC touch area of this unit again. If a 9th device is paired, the device that has not been used for the longest time will be replaced. € Even when this unit is turned off, if this unit is connected to the PC that is powered on with an USB cable and this unit is selected on the device that is paired with this unit, power of this unit will be turned on and connected via Bluetooth® automatically. € If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable. € The One-Touch Connection may not work properly depending on the type of device being used. Book 10 ページ ２０１３年７月８日　月曜日　午前１０時３分 Using Boost Mode It will make the sound played back on this unit easier to hear by boosting the level of specific frequency band. Note • If sound is distorted during playback, switch off the “Boost Mode”. • When saving the power consumption , set “Boost Mode” to “off”. Using the AUX input You can listen to audio via the AUX IN jack ( device with an audio cable (not supplied). [. . . ] This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product. This warranty does not cover the following items unless the fault or defect existed at the time of purchase: (a) Cabinet Part(s) (e) DVD, Blu-ray or Recordable Discs (b) Video or Audio Tapes (f) Video / Audio Heads from wear and tear in normal use (c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card (d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc 5. The warranty is limited on such products and will not cover (a) Internet and or DLNA connection / setup related problems (b) Access fees and or charges incurred for internet connection (c) The use of incompatible software or software not specifically stipulated in the product operations manual; and (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device. [. . . ]