User manual PANASONIC CZRWSC3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC CZRWSC3. We hope that this PANASONIC CZRWSC3 user guide will be useful to you.


PANASONIC CZRWSC3 : Download the complete user guide (5824 Ko)

You may also download the following manuals related to this product:

   PANASONIC CZRWSC3 (658 ko)
   PANASONIC CZRWSC3 (6526 ko)
   PANASONIC CZRWSC3 (6527 ko)
   PANASONIC CZRWSC3 (2391 ko)
   PANASONIC CZRWSC3 (2391 ko)
   PANASONIC CZRWSC3 (2391 ko)

Manual abstract: user guide PANASONIC CZRWSC3

Detailed instructions for use are in the User's Guide.

[. . . ] Important Safety Instructions Before using the system, be sure to read these “Important Safety Instructions”. €¢ Contact your dealer before moving the system Contact your dealer or a professional service provider about moving and reinstalling the system. Electric shock or fire may result if an inexperienced person performs any installation procedures incorrectly. Warning Installation Precautions • Do not install yourself Installation should always be performed by your dealer or a professional service provider. [. . . ] After the timer setting is displayed for three seconds, the display reverts to the current time. Checking the timer setting • If you press either / for the or the , the scheduled time is displayed for four seconds. • When no timer setting has been made , it displays --:--. (Initial Setting) Changing a timer setting • Press / for the for the timer again. Or the , and then when the timer setting is displayed, press / Canceling a timer setting • If you press [CANCEL], the timer setting is canceled. €¢ If you wish to cancel the setting for either the or the timer, press timer and when the scheduled time is displayed, press [CANCEL]. / or the desired Using the same timer setting every day • If you press for 2 or more seconds, “ ” is displayed and the ON timer or the OFF timer will operate the unit at the same time every day. €¢ If you press fagain for two seconds or more, “ ” goes off and the timer operates just once. Adjusting the Wind Direction • Never try to manually move the flap (up-down wind direction plate) that is operated by the remote control. €¢ When the unit stops, the flap (up-down wind direction plate) automatically faces downwards. €¢ When the unit is in heating standby, the flap (up-down wind direction plate) faces upward. Also, bear in mind that the flap starts swinging after the heating standby mode is released, but the display on the remote control indicates Auto Flap during standby heating as well. CZ-RWSU2/CZ-RWST2/CZ-RWSL2/CZ-RWSY2/ Indoor Unit (CZ-RWSK2)/CZ-RWST3 Setting the Wind Direction While the unit is operating, every time you press direction the flap faces changes. , the In the Heat Mode Please face the flap (up-down wind direction plate) downwards. If it faces upwards, the warm air will not reach the floor level. In the Cool and Dry Modes Please face the flap (up-down wind direction plate) upwards. If the plate faces downwards, condensation may form and drip from around the air outlet. In the Fan Mode Initial Setting Setting Flap to Swing If you press to set the flap (up-down wind direction plate) in its most downward facing position, and then press again, is displayed and the flap swings automatically up and down. EN Initial Setting Stopping Flap Swing If you press again while the flap is swinging, you can stop the flap from swinging and set it in place as desired. Thereafter, if you press , you can set the wind direction starting from the most upward position. €¢ When the unit is in the Cool or Dry modes, the flap cannot stop facing downwards. If you try to stop the flap from swinging while it is facing downwards, it will continue moving until it is in the third position from the top. [. . . ] If the indoor temperature is 24 °C or greater when the unit starts running, it will act as a cooler. If the indoor temperature is less than 24 °C when the unit starts running, it will act as a heater. If you press , the wind direction automatically oscillates up and down. Stop: press [Emergency Operation] CZ-RWSL2 CZ-RWSC3 1 2 1 Note • • The Test Run/On and Test/On switches are for use when the unit is installed and test run. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CZRWSC3




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CZRWSC3 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.