User manual ORION TELESCOPES & BINOCULARS ELECTRONIC EYEPIECE

[. . . ] Orion Electronic Imaging Eyepiece, Color Version #8633 Thank you for your purchase of an Orion Electronic Imaging Eyepiece. The electronic imaging eyepiece will give you an opportunity to record and share your astronomical and terrestrial viewing experiences. It can also be used for classroom or telescope demonstrations where not everyone can get to the telescope's eyepiece for viewing. [. . . ] Inserting the Eyepiece in a Telescope For simplest operation, aim and focus the telescope at the object you wish to view using a regular telescope eyepiece first. Take the dust cap off of the electronic imaging eyepiece and insert the barrel of the electronic eyepiece into the telescope's focuser or diagonal. Then focus the image on the TV by using the telescope's focusing mechanism. If you wish to use the electronic eyepiece with telescopes that require . 965" eyepieces, unthread the black 1. 25" adapter and use the . 965" barrel underneath (Figure 1). Removing the Focal Reducer For your first uses of the imaging eyepiece, we recommend that your use the already attached focal reducer as it will give you a wider field of view. When you get more experience with handling and using the imaging eyepiece, you can remove the focal reducer if you want higher magnification. The electronic eyepiece with focal reducer removed. To remove the focal reducer, unthread the 1. 25" adapter from the camera assembly. Then, unthread the focal reducer from the electronic eyepiece and place it aside. Re-thread the 1. 25" adapter onto the electronic eyepiece (Figure 2). If you wish to use the camera without the focal reducer on telescopes that only accept . 965" eyepieces, unthread the electronic eyepiece from the other components and insert it directly into the telescope's focuser or diagonal. Electronic Imaging Eyepiece Operation The electronic imaging eyepiece is automatically on whenever it has power. The eyepiece has auto-gain that will adjust to the level of the light going into the eyepiece. If the colors showing on the monitor are incorrect, you can adjust them by pressing the color balance button on the top of the electronic eyepiece. If you need to reset the color setting, you must remove the power connection and then reconnect. Customer Support (800) 676-1343 Email: support@telescope. com Providing Exceptional Consumer Optical Products Since 1975 Corporate Offices (831) 763-7000 P. O. [. . . ] This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further warranty service information, contact: Customer Service Department, Orion Telescopes & Binoculars, P. Box 1815, Santa Cruz, CA 95061; (800) 676-1343. Customer Support (800) 676-1343 Email: support@telescope. com Providing Exceptional Consumer Optical Products Since 1975 Corporate Offices (831) 763-7000 P. O. [. . . ]