User manual OREGON THGR228N

[. . . ] Congratulations on your purchase of the Remote Thermo-Hygro Sensor (THGR228N). This product is engineered to give you years of satisfactory service if you handle it carefully. They may scratch the plastic parts and corrode the electronic circuit. [. . . ] Note: To ensure proper reception between the main unit and the remote sensor, follow the instructions carefully. Assign a different channel to each remote sensor by changing the channel switch in the battery compartment of the remote sensor. Position the remote sensor and main unit within effective transmission range, which in usual circumstances, is 30 meters. Note: The effective range may be limited by building materials and the position of either the main unit or remote sensors. Though the sensor is weatherproof, and is meant for use outside, it should be placed away from direct sunlight, rain, or snow. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. DECLARATION OF CONFORMITY The information below is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. [. . . ] La lecture du senseur à distance indiquée sur l'Ecran à cristaux liauides dépend de la chaîne du senseur à distance qui aura été choisie. The reset function is required only when the unit is operating in an unfavorable way or malfunctioning. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. [. . . ]