User manual OREGON RM968U

[. . . ] MODE LOCK: motion detection is enabled, but the mode cannot be toggled, only the backlight of the locked mode will turn on OFF: motion detection is disabled Com) to learn more about Oregon Scientific products. If you're in the US and would like to contact our Customer Care department directly, please visit: www2. NOTE The language options are English (E), Dutch (D), Press SET to toggle between calendar with weekday or year. [. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Weekday, second, year and time zone display Can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold in Clock mode to force another signal search. Do not subject the unit to excessive force, shock, dust, temperature or humidity. Do not cover the ventilation holes with any items such as newspapers, curtains etc. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. consult the furniture manufacturer's care instructions for information. The contents of this manual may not be reproduced without the permission of the manufacturer. Collection of such waste separately for special treatment is necessary. The following information is not to be used as contact for support or sales. [. . . ] Users can touch or wave not more than 2 inches above the sensor to toggle between modes. The ON / MODE LOCK / OFF sensor slide switch at the back of the unit is used to enable or disable motion detection. Press is: year, calendar format (month ­ day / day ­ month), month, day and language. [. . . ]