User manual OREGON RM308PA

[. . . ] To stop the alarm, you can use either of the three buttons: [ ], [ Each press on the [ MODE / SET ] will toggle the display in the above order. A B C D Two-line display Displays the local time and alarm time in two selectable modes [ ] Radio reception signal Indicates the condition of radio reception [ ] Alarm icon Appear when alarm is activated [ ] button Enables or disables the snooze function when an alarm goes off or activates the back light and projector for five seconds Up [ ] and Down [ ] buttons Increases or decreases the value of a setting [ / 24hOFF ] button Sets the time for the alarm [ ON / OFF ] button Enables or disables the alarm [ MODE / SET ] button Toggles the display modes and confirms entry while setting the values for display Projector For projecting the current time on the wall or ceiling [ PROJECTION ON ] switch Used with the power adapter to enable extended use of the projector Battery compartment Accommodates two (2) UM-3 or "AA" size batteries for operation [ RESET ] button Resets the unit by returning all settings to factory set default values When located within a 1500km radius of radio signal (DCF77) at Frankfurt, Germany, the clock time will automatically synchronize with DCF77 time-signal transmission. the benefit of a RF controlled clock is that accurate time is maintained and manual adjustments to the time and date are not be required. [. . . ] (UK version within a 1500km radius of radio signal (MSF) from Rugby, England) When the batteries are first installed, the RM313P will automatically search for a radio signal. After initial search, short periodic receptionsignal scans will commence several times a day. Pressing [ ] during an alarm will invoke the snooze function, which will stop the alarm and let it sound off again after eight minutes. â· Pressing [ / 24hOFF ] will stop the alarm, which is still armed and will go off at the set time the following day. â· If [ ON / OFF ] is pressed instead, the alarm will be stopped and deactivated all together. It allows you to return all settings to its factory values, which are 00:00:00 for time and 1-1, Monday, for date. This unit is engineered to give you years of satisfactory service if you handle it carefully. note that the time and date are displayed in 24-hour clock and DAYMONTH format , respectively. For display language, you can choose among English, French, German and Italian--in that order. When [ ] is pressed both the backlight and projection function will activate. Your unit comes with a power adapter so you can use the projector for extended period of time. -- The content of this manual is subject to change without further notice. -- Due to printing limitation, the displays shown in this manual may differ from the actual display. -- The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using this product. [. . . ] -- Due to printing limitation, the displays shown in this manual may differ from the actual display. -- The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using this product. -- The contents of this manual may not be reproduced without the permission of the manufacturer. [. . . ]