User manual OREGON EW99 REV 1

[. . . ] Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. [. . . ] DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. Com), or on the warranty card for this product) for all inquiries instead. Com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will find all the information you need on our website, however if you're in the US and would like to contact the Oregon Scientific Customer Care department directly, please visit: www2. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: · Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. Only use fresh batteries as specified in the user's instructions. Due to printing limitations, the displays shown in this manual may differ from the actual display. The contents of this manual may not be reproduced without the permission of the manufacturer. [. . . ] Secure the sensor in the desired location using the wall mount or table stand. PROBLEM Remote sensor SYMPTOM Cannot locate remote sensor Cannot change channel Data does not match main unit REMEDY Check batteries Check location Check sensors. Only one sensor is working Initiate a manual sensor search PROBLEME SYMPTOME Capteur à distance REMARQUE Insérez les piles du capteur à distance avant celles de l'appareil principal. [. . . ]