User manual ORBIT IRRIGATION 57471 REV G

[. . . ] Off All timer functions are OFF auTO Timer is set for automatic operation and will only water in this dial position SET TIME Set the time of day SET DaTE Set the year, month and day STaRT TIMES Set start times for Programs A and B HOW OfTEN Set the days or interval you want to water HOW LONG Set station run times (0 to 240 minutes) WaTER buDGET Seasonal Adjustment - change station run times all at once ­ 10% to 200% 1 Shows current station while programming or watering 2 Shows current start time while programming 3 Displays active program(s) while programming or watering 4 Y=Year, M=Month, D=Day for setting date 5 Indicates low batteries (replace batteries if showing) 6 Indicates day of week and watering days selection 7 Indicates that more options are available for that dial position by pressing the button NOTE: Use program B only if you want to schedule watering independent of Program A. Return program pod to base Note: During battery changes, programming will be preserved for 30 seconds. If more cycles are desired then press and set another start time (up to 4). [. . . ] NOTE: If start times overlap then the second start time will water after the first is finished. Press to select the desired days to water: select either days of the week, interval (every 1 to 32 days), or odd/even days. NOTE: The % symbol will show on the screen when the value for A or B is anything other than 100%. To select only the A or B program, or individual stations: Press to select only A or B program. NOTE: Manual watering of a set program (A or B) will only work after programming has been set up. After flushing line, install the valve using appropriate fittings (not included) for your system (see figure below). Valves have tapered fittings and therefore require seven to eight turns of thread seal tape to prevent leaking and to guard against the connections bottoming out. Timer- A device that is responsible for turning an automatic watering system on and off. Program (a or b)- One or more watering stations that share a common programmed watering schedule. Rain Delay- A feature that prevents the sprinkler timer from running it's scheduled watering program for a specific duration. Station (Watering Station)- An area where the watering (irrigation) is all controlled by a single control valve. Valve (Watering or Irrigation Valve)- Used in conjunction with sprinkler timers ­ a convenient way to deliver water to lawns, plants and gardens. Remove plug from the recepticle marked "1" on the bottom of the timer. Insert wire connector into the recepticle marked "1" on the bottom of the timer. [. . . ] Remove plug from the recepticle marked "1" on the bottom of the timer. Insert wire connector into the recepticle marked "1" on the bottom of the timer. One or more stations do not turn on: Make sure programming is not in Off or Rain Delay mode. [. . . ]