User manual OPTOMA CM-E73X
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OPTOMA CM-E73X. We hope that this OPTOMA CM-E73X user guide will be useful to you.
 |
Manual abstract: user guide OPTOMA CM-E73X
Detailed instructions for use are in the User's Guide.
[. . . ] INSTALLATION INSTRUCTIONS
Model: CM-E73X
Compatible Models: Optoma EP731/732/732H/737/738/739/H30
READ THIS BEFORE YOU START
Maximum weight limit is 20 pounds (9. 1 kg). Once you have chosen a location for the mount, determine the construction of the ceiling. [. . . ] Recommend maximum extension; do not exceed 15 inches if the base join is angled.
TOOLS REQUIRED
· · · Hex wrench (included). Phillips screwdriver Drill with a 5/16" bit for the TC® anchors · · Drill with a 1/4" bit for the AF6 Alligator® anchors. Two crescent or 3/4" open-end wrenches.
__________________________________________________________________________
T. M.
INSTALLING THE CEILING MOUNT
1. Select an appropriate projector mounting location and extension shafts (Part No. 3) in the desired location, using the mount as a template; mark the two slots onto the mounting surface. Refer to the TOGGLER® brochure "Anchoring Solutions, " (Part No. Then follow the instructions that are appropriate for the type of surface on which you will be attaching the Heavy Duty Ceiling Mount Assembly. Note: if you are using the Alligator® anchors, they must be installed in the center of the ceiling joist or beam. Drill the appropriate sized hole at each marked location and insert the previously selected anchor (Part No. Place the Ceiling Mount Assembly onto the anchors and insert two 2-inch wood screws (Part No. # 1 2 3 4 5 6 7 8 9 10 11 12 13
APPENDIX: PARTS LIST Description Projector Mount Assembly Projector Mount Screws Ceiling Mount Assembly TOGGLER® TC® anchor (not shown) TOGGLER® AF6 Alligator® anchor (not shown) TOGGLER® Red Key (not shown) #10 x 2" Truss Head Phillips Screws "Anchoring Solutions" brochure (not shown) 24" safety cable 6" Extension Shaft (not shown) 9" Extension Shaft (not shown) 1/4" Star Washers Hex Wrench Qty. 1 4 1 3 3 1 3 1 1 1 1 4 1
2.
3.
4.
INSTALLING THE PROJECTOR MOUNT
1. [. . . ] Using two wrenches, tighten the two hexagon shafts and extension shafts, if any, compressing the star washers. Now position the projector and tighten the two ball joints firmly into place using the hex wrench.
3.
4.
5.
6.
T. M.
715 Sycamore Drive Milpitas, CA 95035 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OPTOMA CM-E73X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OPTOMA CM-E73X will begin.