User manual NORTHSTAR SMARTCRAFT GATEWAY

[. . . ] Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1-1 SmartCraft data available from different engines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1-2 What comes with your gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2-1 Connecting the gateway to the SmartCraft system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2-2 Connecting the gateway to the Navman instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2-3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Operation with a Navman FISH 4380 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3-1 Setting up the FISH 4380 for SmartCraft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3-2 SmartCraft Engine data displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] to select an option, then press Gauge type Select the type of gauges to be displayed (not for Tank status display): Analogue: Dial type displays (see also section 4-7: Speed range). Notes: 1 The factory default has gauges appropriate to the type of engine. 2 To further customise the three gauge displays, change Speed range, Speed type and Pitot type (see section 4-7). 20 NAVMAN SmartCraft gateways Installation and Operation Manual 4-3 Troll control Troll control allows adjustment of the engine's idle speed from the Navman instrument. Troll control automatically controls the engine idle speed to maintain a set engine RPM or boat speed. To use troll control, set Troll window to On idle or Always and set Troll mode to Speed or RPM (see section 4-7). To prohibit troll control, set Troll window to Never (see section 4-7). Engaging troll control 1 Set the throttle(s) to idle and the engine(s) in gear. From a main display, press to display the Troll control window (see right). Notes: 1 The Troll range of engine idle RPM adjustment available for both RPM and speed mode depends on engine type. 2 In speed troll control, the boat might not reach the desired speed if the maximum RPM available for troll control is too low or if conditions are bad. Troll can not engage unless engine throttle(s) are in idle, and engine(s) are in gear. To use speed troll control, the Navman instrument must have a Navman paddlewheel speed sensor connected. 2 3 Changing RPM or speed while troll control engaged 1 2 3 From a main display, press the troll window. to display Press or to change the desired RPM or boat speed (see notes 1 and 2). Press Disengaging troll control Either move the throttle from idle, or: 1 From a main display, press the troll window. to display to select Off 3 4 5 2 to leave troll control en- 4-4 Trim indicator When the optional engine trim is adjusted, a trim popup window can show the new trim angle. To see this window or not, set Trim popup to On or Off (see section 4-7: Trim). The window will autoSmartCraft gateways Installation and Operation Manual matically disappear after two seconds, or else press to close the window. Before use, calibrate trim (see section 4-7: Trim). NAVMAN 21 4-5 Engine fault alarms There are many SmartCraft engine fault alarms. These alarms operate just like the other alarms in the Navman instrument; when the alarm sounds, press to mute the alarm: Low reserve oil. A Navman instrument's low battery alarm measures the voltage at the instrument; the above two alarms measure the voltage at the engine. Engine communication lost: The Navman instrument can not receive engine data from the SmartCraft gateway. For more information about the alarm, display the list of active alarms or the alarm history (see section 4-6). Notes: 1 For help when an SmartCraft alarm occurs, contact your Mercury dealer. [. . . ] Guangzhou, Hong Kong, Dalian, Qingdao, Shanghai 1701 Yanjiang Building 195 Yan Jiang Zhong Rd. Ph: +86 20 3869 8839 Fax: +86 20 3869 8780 e-mail: sales@peaceful-marine. com web: www. peaceful-marine. com India Access India Overseas Pvt. Ph: +91 120 244 2697 TeleFax: +91 120 253 7881 Mobile: +91 98115 04557 e-mail: vkapil@del3. vsnl. net. in Esmario Export Enterprises Block No. Ph: +91 40 2784 5163 Fax: +91 40 2784 0595 e-mail: gjfeee@hd1. vsnl. net. in web: www. esmario. com Korea Kumhomarine Technology Co. [. . . ]