User manual NORTHSTAR EXPLORER 721EU

[. . . ] Explorer 721US / 721EU Explorer 725US / 725EU VHF Marine Radio Operation and Installation Manual www. northstarnav. com IMPORTANT SAFETY INFORMATION Please read carefully before installation and use. This is the safety alert symbol. It is used to alert you to potential personal injury hazards, Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. [. . . ] Press ENT or push the rotary knob to show the following DSC SETUP menu options. Sections1. 3and1. 4explainhowtonavigatearoundthemenuandenter, saveandchangedata. (If you do not have a user MMSI, see Appendix E. ) Enter or change the name and/or details of a group. Enter or change your ATIS MMSI (721/725 EU only) ATIS MMSI See section 4-6 . Enable/disable the ATIS function (721/725 EU only) ATIS FUNC See section 4-6 . LL REPLY See section 4-8 . 4-3 Check Your User MMSI (USER MMSI) You can display and read your user MMSI at any time. Select DSC SETUP, then USER MMSI The LCD shows your user name and MMSI. If you have not already entered a User MMSI into your radio, see Appendix-E 4-4 Maintain Your Groups (GROUP SETUP) Use GROUP SETUP to create, edit, or delete 1, 2, or 3 groups of frequently called people stored in alphanumeric order. A group MMSI always starts with 0. 28 Northstar Explorer VHF Series: 721/725 Operation and Installation Manual 4-4-1 Create a Group (GROUP SETUP) 1. If this is the FIRST TIME that you're entering a group name, a line of nine zeros appears. Press ENT or push the rotary knob to confirm each correct entry and to move to the next digit. When you are finished, press ENT or push the rotary knob repeatedly until the cursor moves to the MMSI line. DSC SETUP USER MMSI > GROUP SETUP INDIV REPLY GROUP SETUP > MANUAL NEW 000000000 GROUP NAME ­­­­­­­­­­­­ GROUP MMSI 0­­­­­­­­ FISHER1 012345678 > STORE CANCEL 4. 5. Ifyoumakeanerror, select<andpressENTtobackupandcorrecttheentry(721/725US)orCLRand ENT (721/725 EU). EnterthegroupMMSI. Thefirstnumberisalways0. PressENTorpushtherotaryknobtoconfirmtheentry. Press ENT or push the rotary knob to store the details and return to the GROUP SETUP screen. 4-4-2 Edit Group Name or Group MMSI GROUP SETUP MANUAL NEW > FISHER1 FRIENDS1 FISHER1 > EDIT DELETE EDIT NAME > FISHER1 EDIT MMSI 012345678 FISHER2 012345678 > STORE CANCEL 1. Edit the new name or, to edit only the MMSI, press ENT or push the rotary knob repeatedly until the cursor moves to the MMSI line. Whenyouarefinished, pressENTorpushtherotaryknob(repeatedlyifnecessary)todisplaythenextscreen. Press ENT or push the rotary knob to store the changes and return to the GROUP SETUP screen. 4-4-3 Delete a Group GROUP SETUP MANUAL NEW > FISHER2 FRIENDS1 FISHER2 EDIT > DELETE DELETE GROUP FISHER2 > YES NO 1. PressENTorpushtherotaryknobtodeletethegroupandreturntotheGROUPSETUPscreen. Northstar Explorer VHF Series: 721/725 Operation and Installation Manual 29 4-5 Response to Individual Calls (INDIV REPLY) (US only) You can respond to incoming individual calls with an automatic response or with a manual response. · · An automatic response sends an acknowledgement then sets the request link channel, ready for a conversation. A manual response asks if you want to acknowledge the call, and then asks if you want to converse with the caller. DSC SETUP USER MMSI GROUP SETUP > INDIV REPLY INDIV REPLY > AUTO MANUAL 1. Press ENT or press the rotary knob for an automatic response, or select MANUAL for a manual response. 4-6 ATIS MMSI & ATIS Functionality (EU only) You MUST enter your ATIS MMSI to access ATIS functionality if you are navigating inland waterways within Europe. [. . . ] Use a Philips screwdriver and the set of four flat screws, spring washers, plain washers, and nuts to attach the mounting gimbal to the location site. Insert the two mounting knobs through the holes and tighten them sufficiently to hold the radio at the desired viewing angle. 7-5 Change the Viewing Angle The viewing angle on the gimbal mount has a 20º tilt range. Support the radio, then cautiously loosen the mounting knobs until the radio can be moved. Re-position the radio then tighten the mounting knobs again. 7-6 Recessed Installation 1. [. . . ]