User manual NORTHSTAR 8000I 1KW NETWORK SOUNDER INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NORTHSTAR 8000I 1KW NETWORK SOUNDER. We hope that this NORTHSTAR 8000I 1KW NETWORK SOUNDER user guide will be useful to you.
Manual abstract: user guide NORTHSTAR 8000I 1KW NETWORK SOUNDERINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] Northstar 8000i
Installation Manual
1 kW Network Sounder
www. northstarnav. com
1
Warning and safety information
IMPORTANT SAFETY INFORMATION Please read carefully before use This is the safety alert symbol. Obey all safety measures that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. [. . . ] NorthstarTM is a registered trademark of Brunswick New Technologies Inc.
3
Warranty
The Northstar Warranty Statement is supplied as a separate document. In case of any queries, refer to www. northstarnav. com.
4
Northstar 8000i 1 kW Network Sounder Installation Manual
4
Northstar 8000i 600 W/1 kW Network Sounder
This manual describes how to install the unit, and must be used with the guides in the Northstar 8000i System Processor Installation Manual and also with the transducer installation manual. The Northstar 8000i 1 kW / 600 W Network Sounder can connect to these optional sensors: a variety of Airmar / Radarsonics depth transducer to measure depth and details in the water under the boat (see "Transducer Selection and Installation" page 13) petrol/gasoline fuel flow sensors (FUTURE) NMEA, NavBus (FUTURE) 600 W/1 kW Network Sounder - Front view
A B
Power Connector Network Connector
Connect to ships Power supply Connect to the Northstar 8000i Network see network section under wiring guidelines in the 8000i system processor installation guide Connect to external devices (FOR FUTURE USE) Connect to Northstar Diesel or Gasoline Fuel transducers (FOR FUTURE USE) Connect Transducer (Purchase Separately)
C D E
Options Cable Connector Fuel Transducer connector Sonar Transducer connector
Northstar 8000i 1 kW Network Sounder Installation Manual
5
600 W/1 kW Network Sounder - Top view
A B C D
POWER LED NETWORK LED DEPTH TDXR LED Panel Mounting Holes
Red LED indicates when power is powered on Green LED indicates that the network connection is active Green LED Indicates that the transducer is connected and operating Provides a way of mounting the unit to a bulkhead
6
Northstar 8000i 1 kW Network Sounder Installation Manual
5
What comes with your Northstar 8000i 600 W/1 kW Network Sounder
600 W/1 kW Network Sounder NS004741
Small Protective Caps x 2 MS000333-G
Power Cable NS004800
Mounting Screws x 6 HR000087
This Manual MN000614D-G
Warranty
Northstar 8000i 1 kW Network Sounder Installation Manual
7
Registration Card
Mounting Template LA000591A-G
Also required: Depth Transducer, supplied separately, use either of the following transducers
Make and Model
Airmar B260 Bronze Through Hull Airmar B258 Bronze Through Hull Airmar TM258 Plastic Transom mount Airmar P319 Compact plastic thru hull Radarsonics, 210B thru hull Radarsonics 250 Transom mount tri function
Power
1 kW 1 kW 1 KW 600 W 600 W 600 W
Frequency
50 kHz / 200 kHz 50 kHz / 200 kHz 50 kHz / 200 kHz 50 kHz / 200 kHz 50 kHz / 200 kHz 50 kHz / 200 kHz
Northstar P/N
NS002660R AA002020 NS002658R AA002107R AA002108R AA002077R
A network cable to connect to Northstar 8000i network. Choose from the following cable lengths NS004810 Network Cable 1. 6 ft (0. 5 m) NS004811 Network Cable 6. 5 (2 m) NS004812 Network Cable 16. 5 ft (5 m) NS004813 Network Cable 33 ft (10 m) NS04814 0 Northstar 8000i Cable - Ethernet Joiner, male to male NS004815 Northstar 8000i Cable - Cross Over Joiner.
8
Northstar 8000i 1 kW Network Sounder Installation Manual
6
Network Sounder Installation
Read and observe the Warnings and Notices in the 8000i System Processor Installation Manual.
Follow the 8000i system installation guide in the 8000i System Processor Installation Manual.
Find a suitable location for the unit following the Location Guidelines in the 8000i system Processor Installation Manual.
Find a suitable location for the unit. The unit is best mounted onto a vertical panel with the connectors facing down and any cables made with drip loops. Use the screws supplied to secure the enclosure to the panel.
Northstar 8000i 1 kW Network Sounder Installation Manual
9
Connecting the sounder
A B C D E
Northstar 8000i 1 kW / 600 W Network Sounder NS004741 Northstar 8000i 8 Port Network Linker NS004721 Transducer Network Cable DC power : Use a 5 Amp fuse
10
Northstar 8000i 1 kW Network Sounder Installation Manual
Connect Power Connect to power source using the supplied power cable making sure a 5 Amp fuse is used
A B C D
Red Black Brown Fuse Battery
Battery Positive Battery Negative Ships Ground Use a 5 Amp fuse or breaker 12 V DC or 24 V DC Nominal
Connect to the 8000i network Connect the Sounder processor to the 8000i network by using one of the following 8000i network cables, connect one end to the sounders network port and the other to the 8000i Network linker. Network Cable 1. 6 ft (0. 5 m) NS004810 Network Cable 6. 5 ft (2 m) NS004811 Network Cable 16. 5 ft (5 m) NS004812 Network Cable 33 ft (10 m) NS004813 NS004817 Unterminated Cable 328 ft (100 m) (Use NS4816 Network Connector Field Terminating Kit) If the sounder is part of network that has only two (2) network devices use a crossover cable as below
Crossover Cable NS004815
Northstar 8000i 1 kW Network Sounder Installation Manual
11
Options Port (FUTURE)
Options Cable NS004801
1 2 3 4 5 6 7 8 9 10 11 12
Purple Pink Yellow Black Black/White White Orange Blue Dark Green Brown/White Gray Light Green
RS-422 out + RS-422 out NMEA out + Ground (NMEA output -) RS422 RS422 + NavBus + NavBus External alarm Remote power on (Inverted) N/C Remote power on
Fuel Port (Future)
Fuel Port Connector (Future)
1 2 3 4 5 6 7 8 Fuel A Input Twin/ Starboard NavBus Fuel Fuel B Input Single/ Port Ground +9 V Fuel
12
Northstar 8000i 1 kW Network Sounder Installation Manual
7
Transducer Selection and Installation
Be sure to turn the power off before starting the installation. Further, it is highly recommended that you keep power off while you're performing the installation. If power is left on or turned on during the installation, fire, electrical shock, or other serious injury may occur. Be sure to ground the equipment to prevent electrical shock and mutual interference. Be sure the transducer outputs are tied together before handling to avoid electrical charge build-up.
Be sure to use a 5 Amp fuse. Using the incorrect fuse can result in fire or damage to the Network Sounder
Mounting the transducer requires drilling holes through the hull; make sure the installation does not cause the vessel to leak. A thru-hull installation should be performed by a professional installer. Do not perform a thru-hull installation of the transducer when the vessel is actually in the water. [. . . ] If you need technical support, or answers to other questions after you've followed the instructions in this manual, you can: · contact your Northstar distributor or · see the inside back cover of the manual or · visit www. northstarnav. com. Before you make contact, be sure to have: · the serial number of the hardware (usually shown on the faceplate of the unit). When you describe the problem, be as complete and as accurate as possible.
22
Northstar 8000i 1 kW Network Sounder Installation Manual
UNITED STATES 30 Sudbury Road, Acton, MA 01720, United States Ph: +1 978. 897. 6600 Fax: +1 978. 897. 7241 sales@bntmarine. com
EUROPE Unit 2, Ocean Quay, Belvidere Rd, Southampton, SO14 5QY, England Ph: +44 2380 339922 Fax: +44 2380 330345 northstaruk@northstarnav. com
AUSTRALIA PO Box 479, Gladesville, NSW 2111, Australia Ph: +61 2 9879 9000 Fax: +61 2 9879 9001 northstaraus@northstarnav. com
NEW ZEALAND PO Box 68 155, Newton, Auckland New Zealand Ph: +64 9 481 0500 Fax: +64 9 481 0590 northstarnz@northstarnav. com
www. northstarnav. com
www. northstarnav. com
Northstar 8000i
Installation Manual
1 kW Network Sounder
Made in New Zealand MN000614D-G [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NORTHSTAR 8000I 1KW NETWORK SOUNDER
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NORTHSTAR 8000I 1KW NETWORK SOUNDER will begin.