User manual NIKE OREGON SQUARE DIGITAL

[. . . ] [. . . ] Press any button to turn watch ON TIME Warp: Hold for 1 second in any mode to return to TIME mode Turn Button Chime ON / OFF Adjust Screen Contrast Electrolite ON Hold LIGHT button for 2 seconds for a longer Electrolite (15 seconds) 2 sec Switch Time Zones EXIT Adjust Function CHRONOGRAPH mode can be used to capture lap data, total time data down to 1/ 100th of a second. 1 sec RESET Run 2 sec Run saved to DATA mode SAVE Run Switch display between Total Time and Lap Time STOP Run START Run Mark LAP 1 The chronograph will pause for 5 seconds upon each marked lap then continue timing the next lap Mark LAP 2 In DATA mode you can review lap and total time data saved from CHRONOGRAPH mode. LAP 1 Time LAP 2 Time LAP 3 Time Total Time Best Lap Average Lap CLEAR Selected Run Select RUN 2 sec CLEAR ALL Runs 1 sec In TIMER Mode you can set up to 5 repeating segments for customized interval training. Set up to 5 segments 1 sec START Timer View segments 1 sec STOP Timer RESET Timer RESET ALL Segments Set a segment to 00:00'00" to deactivate it 2 sec In ALARM mode you can set three time alarms and one hydration alarm. The time alarm will sound for 20 seconds. Adjusted Alarms turn ON upon EXIT Alarm ON / OFF 1 sec Select Alarm to Adjust Hydration Alarm: 0 to 11:59' Reset Watch 3 sec 3 sec Mode Limits CHRONOGRAPH 99:59' 59" TIMER 99:59' 59" H20 RESIST 100 m OPERATING TEMPERATURE -5 to 50° Celsius Material Specifications CRYSTAL Mineral Glass STRAP Polyurethane or Synthetic Fabrics CASE Polycarbonate or Stainless Steel CASEBACK Stainless Steel BEZEL Stainless Steel BUTTONS Stainless Steel BUCKLE Stainless Steel Battery Type CR2032 3V Lithium Warning!They should be disposed of properly according to local regulations Note: See warranty card for battery replacement and service centers [. . . ] [. . . ]