User manual NAIM ARMAGEDDON

[. . . ] NaimUniti units running earlier software will not operate fully in the manner described in this manual. The software running in a NaimUniti is displayed in the Factory Settings menu. 10 NaimUniti Specifications 23 9 9. 1 9. 2 9. 3 NaimUniti USB/iPod Interface USB Media and File Compatibility iPod Compatibility and Charging Browsing and Playing USB Files 22 22 22 22 8 8. 1 8. 2 8. 3 NaimUniti UPnPTM Audio Interface UPnPTM Servers Audio File Compatibility Scanning Servers and Playing Files 21 21 21 21 7 7. 1 7. 2 7. 3 7. 4 7. 5 7. 6 NaimUniti Multi-mode Radio Tuner FM Tuner ­ Seeking Stations DAB Tuner ­ Seeking Stations iRadio Tuner ­ Seeking Stations Adding iRadio Stations Storing Radio Presets Using Radio Presets 19 19 19 19 20 20 20 6 6. 1 6. 2 6. 3 6. 4 6. 5 NaimUniti CD Player Disc Loading CD Transport Control CD Display and Track Selection CD Track Playlist Programming CD Player Maintenance 17 17 17 17 17 18 Page 5 5. 1 5. 2 5. 3 5. 4 5. 5 NaimUniti Integrated Amplifier Selecting Inputs Volume Control Amplifier Display Signal Outputs Amplifier Fault Warnings 16 16 16 16 16 16 N a im U nit i Intro du c tion 1 NaimUn it i Introd ucti o n NaimUniti is a highly capable product that will repay time and effort spent on installation and setup. Each of these is introduced in the following paragraphs and subsequently described in full detail in Sections 5 to 9. [. . . ] Volume and Balance parameters specify maximum allowed volume, and the channel balance respectively. Note: If NaimUniti is connected to the network both wirelessly and via Ethernet (wired), the Ethernet connection will take priority. 4. 6. 1 Wireless Network Connection Set Up Select Network <Don't Use Wireless> LingNet 4GreenNet TomNet 3/6 4. Volume: Options 0 to 100 (adjust using handset 6 or 5 keys) Headphones 4Max. Volume: 1/1 100 If the Wireless parameter is selected in the Network Settings menu the Select Network menu will display a list of the available networks. Use the handset up (5) or down (6) keys to scroll through the list and the ok/list key to select a network. Note: NaimUniti is compatible with most commonly used Wi-Fi standards. Routers that support 802. 11b and 802. 11g will work, however those with 802. 11g compatibility are recommended for best results. Note: As with any wireless network hardware, NaimUniti connection reliability will be affected by both network router performance and Wi-Fi signal quality. To minimise the possibility of poor connection reliability, NaimUniti should be connected to network audio sources by no more than one wireless "leg". Other "legs" necessary between NaimUniti and the network audio sources should be wired. Note: NaimUniti cannot connect to a "hidden" wireless network. Auto Off defines the length of time the display will remain switched on after the last interface operation is carried out. Note: If the display has been switched off using the handset disp key this setting will take priority over the Auto Off setting. The display will always switch on briefly when control commands are received. The Clock When Off settings enables the clock to remain displayed when other display settings are switched off. Note: If Clock When Off is set to "Yes" and Logo Off is set to "If Muted", the clock display will dim automatically 10 seconds after mute is selected. Note: Wireless connection difficulties can sometimes be resolved by changing the wireless connection channel in the router settings. 4. 6. 2 Non-DHCP (Static) Network Connection If DHCP is de-selected in the Network Settings menu, five further parameters will be displayed. Parameter IP: Network Settings 4IP: Mask: Gtwy: DNS1: 1/5 192. 168. 0. 80 255. 255. 255. 0 192. 168. 0. 1 192. 168. 0. 1 The Logo Off settings select the circumstances in which the front panel logo illumination will switch off. 4 . 8 Th e C l ock a n d A l a r m M en u The Clock & Alarm setup menu enables the NaimUniti clock to be set and alarms to be configured. Clock & Alarm 1/5 4Set Weekday Alarm Set Weekend Alarm Adjust Time Zone Resync Time From Net Options User definable (numerical Default: 0. 0. 0. 0 Mask: User definable (numerical Default: 0. 0. 0. 0 Gateway (Gtwy): User definable (numerical Default: 0. 0. 0. 0 DNS1: User definable (numerical Default: 0. 0. 0. 0 DNS2: User definable (numerical Default: 0. 0. 0. 0 entry) entry) entry) entry) entry) Selecting Set Weekday Alarm or Set Weekend Alarm opens a menu that offers the following parameters and options: Parameter Enabled: Options Yes / No. Selecting No disables the alarm. Weekday Alarm 1/4 4Enabled: No Alarm Time: 07:00 Input: Fluid Radio Volume: 30 These settings enable NaimUniti to connect to a network using a fixed IP address. On selecting each one in turn, numerical entry screens will be displayed that require completion with the appropriate network IP address settings. Consult your network router's user documentation for help with specifying fixed IP address settings. Alarm Time: 4. 7 The Front Display Menu The Front Display setup menu enables the behaviour of the NaimUniti front panel display to be modified. The options are tabulated and described in the following section: Front Display 1/4 4Off During Mute: No Auto Off: 2 mins Clock When Off: Yes Logo Off: If Muted 07:00. [. . . ] Alternatively, selecting a category using the up (5), down (6) keys followed by the ok/list key will display the full list of tracks contained within the category. Tracks can then be selected for playback by using the up (5), down (6) and ok/list keys. In long lists the handset numeric/text keys can be used to jump through the list alphabetically. Once playback is underway the NaimUniti display will exit from list mode and revert to normal mode where the handset transport keys ( ) can be used to control playback. [. . . ]