User manual MTD OEM-290-252
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MTD OEM-290-252. We hope that this MTD OEM-290-252 user guide will be useful to you.
Manual abstract: user guide MTD OEM-290-252
Detailed instructions for use are in the User's Guide.
[. . . ] Bolo Tine Kit OEM-290-252 / 290-252-081
for BRONCOTM, SUPER BRONCOTM, and TUFFY® Tillers
Installation Instructions THANK YOU!
Thanks for buying new bolo tines. [. . . ] Badly worn tines will result in a loss of tilling depth, and reduced effectiveness when chopping up and turning under organic matter. With the engine shut off and the spark plug wire disconnected, carefully tilt the tiller forward until the engine is resting on the ground. (On some models it may be necessary to prop up the rear of the tiller or to add additional weight to the engine to stabilize the tiller in this position. ) 2. Raise the tiller hood flap and secure it out of the way with a heavy rubber band or string. NOTE: Removing the tine holders from the tine shaft may ease the installation of your new bolo tines, but is not necessarty. To do so, remove the screw and nut which secure the tine holder to the tine shaft, refer to Figure 2. NOTE: Replace the inner tines (both left-hand & right-hand) before proceeding to the outer tines. Use two 9/16-inch wrenches to remove the two screws (A, Figure 2), lockwashers (B) and nuts (C) that attach a single tine to a tine holder. [. . . ] BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483
Printed in U. S. A. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD OEM-290-252
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD OEM-290-252 will begin.