User manual MPMAN XV-D500 HDMI

[. . . ] Deleting either single or all musical (or recorded) files in the current directory of the player. Off Status Memorization: When turned on, the player can return to the last off-status, including the musical file to be played and the recording position. Resuming playing: The player can memorize the position where it stops playing the musical file in a directory. Once the Play button is pressed after turn on the player, the player will start playing the musical file just from the point where it stops last time. [. . . ] 4. 4 Auto Off In all the sub-interfaces of the Stop interface, if the player idles for a time preset, then the player will be automatically turned off. 5 Voice REC Realize recording sound files of MS-ADPCM WAV and AG8 ACT format. It has - 15 - the following interfaces: Stop, Recording, Pause and Directory Selection. 5. 1 The General Interface of the Recorder <the recording interface> 00:00:03 indicates the progress of the recording. In the Stop interface the length of the current recording will be displayed. indicates the coding format of the current recorded file, including AG8 and AD32. The "15" represents the number of currently existing recorded files. 5. 2 The Stop Interface Note: When you enter into the Stop interface, the information about the current recording will be displayed and user's operations are wanted. Button Function in the Stop Interface Long-Press of MODE: To return to the main menu. Short-Press of A-B/PLAY: To enter the recording interface and start recording. The Stop Menu Interface Note: You can select Local folder, REC Types and Exit in here. During the pause, if the electronic signal level is too low, the recording file will be saved, and then the player will return to the Stop interface. 5. 5 Auto Off In the Stop interface or the Pause interface and its sub-interfaces, if the idle time reaches the setting value in the system management, the player will go into the Standby mode, and the recorded sound in the Pause interface will be saved. It has the following interfaces: Playing, Local folder Selection, Delete, as well as function selection and settings interfaces. 6. 1 Functions in the Stop Interface Note: When you enter into the Stop interface, the information about the current playing of recorded sound will be displayed and user's operations are wanted. The interface is as shown in the Fig below. <Recorded File Playback> 00:00:03 is the time display for playing the recorded sound. 01/15 represents the order of current recorded file and the total number of recorded files in the current directory. REC01 is the filename and 2004/3/15 10:23 is the date and time when the file was created. (They will not scroll when the playing of the file stops. ) Button Function in the Stop Interface Long-Press of MODE: To enter into the main menu. If the current file is an invalid musical file, then the message "Format Error" will pop up. Long-Press of PLAY: To turn the player off. - 18 - Short-Press of LAST: To switch to the last recorded file in the current directory and reset the time point to zero. Long-Press of LAST: To cycle to the last recorded files and reset the time point to zero. [. . . ] Download Upgrade Download Upgrade is to download the system firmware version from the PC side into the player and overwrite the current firmware version in the player. Moreover, if both the system firmware and its backup are damaged, the Download Upgrade can repair the system firmware. Doing: UPGRADE is upgrading or backing up materially, so users can't cancel the upgrade at this time. <Firmware Upgrade - In Upgrading> Done: UPGRADE has finished the upgrade or backup. <Firmware Upgrade OK Interface> Failed: UPGRADE is failed. <Firmware Upgrade Failure Interface> - 28 - Operation Instructions Don't respond to button operations. After finishing the Download Upgrade, the player will switch to the Done status. [. . . ]