User manual MPMAN TPM 300

[. . . ] Playback the files recorded Under stop or pause status, press button to play current recorded files. LCD displays the volume, track number, time indicator, battery level, EQ indicator and rolling turn plate indicator NOTE: The unit only supports the files in IMA ADPCM and WAV format. Pause/stop/power off 1) Pause: under playing status, shortly press button to pause the playback. Shortly press button again to continue play back 2) Stop: under play or pause status, continuously press button for about 2seconds, the turn plate stop flashing, then release the button to enter stop mode. [. . . ] Note: this unit only supports WAV files in IMA ADPCM format 2. 9 Time indication of files recorded 1. Time indication under the stop state of DVR Under the stop state of DVR, it will display the total time of current files recorded. If the time length of the file recorded is less than 1 hour, the time length will display as (m; s) at the right side of the sequence of song, if more than 1 hour, it will display as (h; m); while ":" will flash, like "01:34" displays below the song sequence, it indicates that the whole length of time is 1 hour 34minutes. Playback time indication of the DVR recording files The file recorded in the unit, whose time length is less than 1 hour, it normally displays the playback time as (m; s), when its time length is more than 1 hour, the playback time exceeds 1 hour while playing, the time length of current file display as (h; m), ":" will flash. Telephone conversation recording Connect the external telephone line and telephone cable to the telephone adaptor; link the audio line to the adaptor and LINE IN jack. Continuously press button to start recording. 9 LINE IN LINE IN cable Telephone line Telephone adapter 2. 11. Transfer recorded files to the external equipment Link the audio cable to the PHONES (earphone) and external equipments' in-put jack, and then press button of the recorder and the external equipment's REC button at the same time. (Please test the external equipment's REC function before your recording in order to avoid failed recording) Note: during the recording, if the unit was shut off by knock or other actions, all recording files will lose. Convert REC format files into WAV format The REC format files can be converted into WAV format through the software in the install CD accessorized with the unit. 1). Clock "convert" and start the converting Besides, the software can also play WAV and Mp3 format files. NOTE: The order number of files recorded is sequenced according to the type of the files; files recorded via HP, SP are sequenced ahead of files recorded in LP. REC Type Under the state of REC Type mode, press "+" or "-" to select (HQ/HP) or (LQ/LP), while using HQ/HP, files will have high and good quality, while using LQ/LP, it's in long time recording. 4. 1High quality (HQ) recording and low quality (LQ) recording operating The unit has two ways of recording: High quality and low quality. NOTE: Under REC Mode, icon "HQ/LQ" indicates the format of files recorded; under DVR mode, icon of "HQ/LQ" indicates the format of the current recording files. While files recorded via HQ/HP, format of files will be WAV, recorded via LQ/LP, files will be in REC format. Voice-controlling recording: ON/FF Under the state of voice-controlling recording, press "+" or "-" to select OFF or ON, OFF is to close voice-controlling recording, while ON is to open it. If select ON, REC type of HP, it means you select the format of WAV in voice-controlling recording; if select ON, REC type of LP, it means you select the format of REC while using voice-controlling recording. While under the state of "ON", if the unit doesn't detect any voice, it will pause recording, if detects, it will continue recording. Check the remaining time of recording 15 Under the remaining time mode, LCD displays the remaining time. If the remaining time doesn't exceed 9999 minutes, minute will be used as the unit of time, for instance, remaining time is 123 minute, it will displays as: 0123, unit (M). If the remaining time exceeds 9999 minutes, hour will be used as the unit of time, for instance, remaining time is 12345 minute, it will displays as: 206h, unit (hr). Windows 98 base needs installation of driving program, while Windows 2000 / XP / I do not. [. . . ] Double click Player Recovery Device Class>Player Recovery Device, see as follows: 27 Click Driver>Update Driver. . . the following windows will pop-up. 28 Click NEXT on each continuously appearing window. 29 B. under Windows 98/ME, right click "My computer>Properties> Device Manager", to check whether there is "Player Recovery Device" in device manager, see following picture. Click Player Recovery Device Class>Player Recovery Device, see as follows: Click Driving Program as follows: 30 Click Driver>Update Driver. . . 31 Installation is finished. 32 Trouble Shooting 1. Standard MP3 only includes: the songs in layer 3 of MPEG 1, layer 3 of MPEG 2 and layer 3 of MPEG 2. 5. Otherwise, it won't be played in the player except transformed by the corresponding software. [. . . ]