User manual MPMAN SR30

[. . . ] PC System Requirements The followings are the basic requirements of the PC to use the MP3 Player. Please carefully read and confirm the requirements. Pentium 200MHZ or above Windows 98SE / ME / 2000 / XP (Windows 98 ­ Install Driver) Mac OS 9. 0 / 10. 0 USB (Universal Serial Bus) Port CD-ROM Drive Hard Disc Space 20MB or above (Additional capacity is required to save the music file. ) 64MB RAM or above !NOTE: Actually available built-in memory in this player is less than the nominal capacity of the product because the FirmWare uses a part of the capacity to drive the system. 3 1 3. The output class of the product guarantees the best possible sound of the mid-size volume. As the high volume for a long time may damage the hearing, listen to music in moderate volume. [. . . ] Format Player 1) Formatting in the Windows ¨ç Select the removable disk, and then click right mouse button to select Format (FAT). ¡Ø Please note that the formatting will irrecoverably remove all contents of the Player. 2) Formatting in the Player This Player is compatible with two types of formatting: FORMAT and LOW FORMAT. The general FORMAT is the same as the Windows formatting, while the LOW FORMAT removes all setting data such as the font and logo as well as the data stored in the Player. The setting data will automatically be initialized by the factory default values after formatting so that you need to newly define a font and logo. ¨é Press FORMAT for the general formatting while LOW FORMAT for the low formatting. ¡Ø We recommend that you do not use the LOW FORMAT other than the special occasion. 21 3 ¡Ý 4. Installing Logo Editor & Applying Logo to Player This program helps the user create its own logo that first appears on the display when the power is ON in the Player. To change the logo, use this program again to download the final logo file to the Player. Run install. exe in the directory of the Logo Editor to enter "Compressed Full Path", and then select "Uncompress". LogoEditor. exe Data Images !NOTE: Please refer to the separate instruction manual for the details of using the Logo Editor and applying the edited logo to the Player. 22 4 1. Basic Operation (1) 1) Display - Displays the operating status of the product. - When listening to the music or the recorded file, briefly press to pause the music, and then briefly press again to resume the music. The recorded file will be saved to the VOICE folder in the format of V001. mp3 and V002. mp3. Press MENU¡æ MUSIC¡æ VOICE, and use buttons to search and play the recorded file. Lengthily press A<-->B/REC button to start voice recording if the LINE is not connected and the FM radio station is not on. 32 4 3-3. RECORDING Mode (2) Recording the External Device (LINE IN) Connect the external device to be recorded as shown below. Turn the power ON and select MENU¡æ recording the external device. RECORDING¡æ LINE ENC. to start When recording from the external device, do not listen to the FM station in the Player, which may cause the noise. The LINE IN cable provided with the Player may not be compatible with some home audio units. You cannot record without connecting the line cable. 33 4 ¡Ý 4. UPGRADE (1) You can upgrade the FirmWare to add/change the function and improve the performance of the Player. How to upgrade FirmWare is as follows: More than two scales of the battery gauge shall be available before upgrading the FirmWare. Replace the battery less than two scales of the battery gauge before upgrading. 1. Confirm the FirmWare version (V3003 1. 00) of the Player, which appears on the display as shown below when turning the power ON. In this example, V3003 indicates the model name and 1. 00 indicates the FirmWare version (Ex. [. . . ] Scrolling Speed ¡Ý Adjust the speed of scrolling the file name or the ID3 TAG information during the playback. Use button to adjust the speed in 10 steps, and then use MENU button to select. The higher the step is, the faster the speed is. 43 5 ¡Ý 6. SETTING (2) Contrast Adjust the brightness (contrast) of the Display. [. . . ]