User manual MPMAN MP-FOL6

[. . . ] Push and hold on to the left to fast-rewind within the files. + Push downward to decrease the volume. Push and hold upward to increase the volume rapidly. Battery Installation When the bars in the battery indicator (in the display) become low (figure 1), replace the battery as follows. Close the battery compartment door. - BATTERY PRECAUTIONS To avoid battery leakage or corrosion, remove the battery from the player if the player is not to be used for a long time. [. . . ] From the "Safely Remove Hardware" window, select "USB Mass Storage Device" and click the "Stop" button. The "Stop a Hardware Device" window will pop up as shown: 3. Now, it is safe to remove the USB Cable and the DAP from the computer. Remarks: If the "Safely Remove Hardware" icon is not displayed on the task bar, please double click on My Computer. Right click on "Removable Disk", left click on "eject". Then it is safe to remove the DAP from the computer. GB - 12 Operation LISTENING TO MUSIC After you have transferred MP3, WMA or WAV files from the computer to the DAP player, you can start listening to music while you learn how to use the rest of the features. Insert the earphones into the earphone jack of the player; press the II button to turn the player on. Use the navigation keys to forward, reverse, adjust the volume and access to Navigation mode. The following menu will be displayed: Push or until your desired selection is highlighted and press the confirm the selection. /Navi button to MUSIC PLAYER To listen to any files or songs stored in your DAP or run the Play List, you can select the MUSIC PLAYER mode. Using Special Functions Equalizer Mode (EQ) The current equalizer mode is displayed in the lower right hand corner of the display n in a rectangular block with a black background. Changing the EQ mode - Press and hold the EQ/ button until the current mode is displayed with a clear block background. Keep pressing the EQ/ button repeatedly to select one of the six equalizer modes: Stop pressing the EQ/ button when your desired selection is displayed with a clear background. The background will turn back to the yellow after a few seconds. GB - 13 Repeat Button Press the EQ/ button repeatedly to select different repeat mode options. As each mode is selected, the following icons will displayed on the right upper part of the display: Play all the files in the player once. Press /Navi button once to start with point A and press /Navi button again to end with point B . (The play list must be created before using this function. ) Plays the play list repeatedly. (The play list must be created before using this function) NAVIGATION You may search for, listen to, and program the play list in the Navigation mode. Press the mode button and use the or the button to highlight the Navigation. Press the /Navi button to confirm and access in the Navigation menu. All the files are displayed in the Root/ folder. - Press the EQ/ button; a number icon (01, 02 etc. ) will be displayed next to that song or file. [. . . ] Vol) 130mW per channel, 8ohm 85db (MP3) MPEG 1/2/2. 5 Layer 3 Windows Media Audio ADPCM encoding 8kbps ­ 320kbps ID3 Tag 70. 8 x 65 x 24 mm Approx. 42 g (without battery) 1 x AAA battery Full Graphic OLED USB 2. 0 128MB / 256MB / 512MB Win ME, 2000, XP and Mac OSX Win 98SE (Driver is required) Approx. 7-8 hours (Low resolution) Yes (Except Windows 98 and Mac) 23 F to 104 F (-5 C to 40 C) Specifications are subject to change without notice. GB - 21 CARE AND MAINTENANCE Your Digital Audio Player is a precise electronic device, and should not be subjected to rough handling or exposed to extreme temperatures or moisture. [. . . ]