User manual MPMAN MP-F56

[. . . ] Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: £» Start your volume control at a low setting. £» Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: £» Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For A Lifetime Use wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association' Consumer Electronics Group recommend you s avoid prolonged exposure to excessive noise. [. . . ] Once these files are stored on your computer you can easily copy them to your MP-F56. Connect the computer to your MP-F56 player using the supplied USB cable. Press the POWER button to turn the unit on; the following will be displayed in the LCD screen of your MP-F56: A "Removable Disk" window will automatically pop up on your computer screen. If a SD/MMC memory card has been inserted (see page 14) another folder will appear on your computer screen to represent the card. To add more files and songs to your player simply drag and drop MP3, WMA or WAV files from anywhere on your computer into the "Removable Disk" window. When you are finished, see the Safely Remove Hardware procedure before disconnecting the MP-F56. 12 DOWNLOADING AND TRANSFERRING FILES (CONTINUED) SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER NOTE: To avoid damage to your player or data loss, always follow the procedure listed below before disconnecting the USB cable from your computer or disconnecting the player from the USB cable. Using your mouse, double click the "Safely Remove Hardware" icon on the task bar. From the "Safely Remove Hardware" window, select "USB Mass Storage Device" and click the "Stop" button. The "Stop a Hardware Device" window will pop up as shown: Click "OK". When the "Safe to Remove Hardware" window is displayed, you may remove the player from the USB cable or remove the USB cable from the computer. 13 DOWNLOADING AND TRANSFERRING FILES (CONTINUED) EXTERNAL MEMORY CARD TO AVOID DAMAGE, make sure the unit is off before inserting or removing the card. Open the battery compartment door by sliding it towards the bottom of the unit, as shown in figure 1. Insert a SD/MMC memory card (not included) up to 512MB, facing up as shown in figure 2. The memory card indicator will appear at the bottom left corner on the display. To remove the SD/MMC memory card, push the edge of the card as shown in figure 3, then the card will spring out. Carefully remove the card. Figure 1 Figure 2 Figure 3 14 OPERATION TURNING THE POWER ON Turn the unit on by pressing the Power button; the MPMan start screen will appear in the display temporarily. To turn the unit off, press and hold the Power button; "Holding to Power Off" will appear in the display. When the unit turns off, release the Power button. LOCK SWITCH Slide the LOCK switch to the Lock (down) position; the lock indicator will appear in the display and no buttons will be able to be pressed. This is useful when you do not want the track changed by accidentally pressing a button. [. . . ] Connect the USB cable to your computer and the other end to the MP-F56. Press and hold the POWER button for about 10 seconds; the dialog box will begin to load. If a dialog box appears on the screen, select YES for updating and Formatting the unit (this will delete all the files in the unit) or select NO for updating the unit without formatting the unit. [. . . ]