User manual MPMAN ICR 280

[. . . ] Under the state of pause or stop, press M to shift MP3 mode from DVR, from MP3 to Voice-controlling recording, from Voice-controlling recording to REC type, from REC type to remaining capacity mode. Recording Under any mode or state(except for powering off), shift REC to "REC", the unit will enter the recording state, LCD displays "" and recording icon " ", recording indicator light will become bright and shine during recording, the unit start to record. While recording, press "Play/Pause" to pause the recording, the turntable will appear and shine. Under the state of pause, press "Play/Pause" to resume recording, the turntable will display. [. . . ] In the sequence of the same type of files, if it lacks of file in the sequence, the files recorded afterwards will fill up the space. Thus it will come out some differences between the name of files and the order number. For instance, while recording via HP, the file recorded will list at the end of the files recorded via HP; while recording via LP, the file recorded will list at the end of the files recorded via LP. The unit can support 199 files at most, if exceed 199, 10 please create a new folder, move the files recorded previously to the newly-created folder, then continue recording. 3. 1 MP3 mode Under stop or pause status, press button to play current file NOTE: The unit can play the files in MP3 (The 3rd layer of MPEG1, MPEG2, MPEG3, MPEG2. 5) and WMA format. 3. 2 Pause/stop/power off Pause: under playback status, shortly press button to enter pause mode. And press button again to continue the playback Stop: under playback or pause status, continuously press button for about 2seconds, the turn plate indicator stop flashing. Under stop status, the total length of file will displayed below the track number Power off: under playing or pause or stop status, continuously press button until the LCD display OFF. Then release the button the unit is power off Note: under pause or stop status, the unit will automatically power off if no operation 11 was conducted within 3 minutes. 3. 3 previous / next file, FF/RW Under playback status, shortly press - button to skip to the previous file; shortly press + button to skip to the next file. Under the state of playback, press "-" to skip to the previous file; press "+" to skip to the next file; press and hold "+" to FF, press and hold "-" to RW. 3. 4-volume adjustment Press and hold "Mode", a shine line will appear below the turntable of LCD. Press and hold "+" to increase the volume, while continuously press "­"to decrease the volume. 3. 5-EQ Mode selection Shortly press EQ button to select EQ modes 1-7, which correspond to NATURAL, ROCK, POP, CLASSIC, SOFT, JAZZ, and DBB effect. 3. 6-REPEAT modes selection Shortly press REP button to select repeat mode: no repeat, single repeat, and repeat all. Delete one 12 Under stop status, continuously press EQ button to enter delete mode. Then the LCD will display DELETE and ONE and the indicator will flash to be confirmed. If you press other buttons except PLAY and EQ or no operation was conducted within 5 seconds, the unit will give up delete and return to stop status. Delete all Under stop status, continuously press EQ to enter delete mode. Then the LCD display DELETE and ONE and the indicator will flash to be confirmed, shortly press EQ button again, LCD will display and flash ALL to wait the confirmation. If you press other buttons except PLAY and EQ or no operation was conducted within 5 seconds, the unit will give up delete and return to stop status. Note: this unit can play MP3 (MPEG1, 2, 2. 5 layer 3) and WMA format files MP3 mode, DVR mode and remaining capacity checking mode Under stop status: shortly press MODE button, DVR mode will shift to MP3 mode and MP3 mode will shift to DVR Setting mode & remaining capacity checking mode. [. . . ] Why doesn't the memory size displayed under the operational system match the figure on the tab?The software in the MP3 player takes up a small portion of the memory, which coincides with the corresponding standards. About WAV format This solution supports WAV files of IMA ADPCM format only. If you want to store WAV files of other format in this player, please set up a new folder and store the WAV files in it. [. . . ]