User manual MPMAN DAB120

[. . . ] Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel. DANGEROUS VOLTAGE Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure. ATTENTION The owner's manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the manual. This unit includes micro-processors which may malfunction as a result of external electrical interference/noise or electrostatic discharge . [. . . ] Note: If there is no stations found after auto scan, the radio will enter into the Tune Select Menu and the display will show "Manual tune", you can now press the SELECT button to select manual tune or press the SCROLL or buttons to select auto scan modes for stations. Clock setting The clock will only set and be updated if you can receive DAB signals in your location. In order for the clock to synchronise to the current local time you must leave it one DAB station for a short period. DAB auto tune modes There are two types of auto scan modes, one is local auto scan and the other is full auto scan. Local auto scan will only search for the UK DAB Band III channels and full auto scan will search for all DAB Band III channels. After the scan has finished, the first alphanumerically found station will be automatically selected. To activate the local auto scan, press the MENU button to enter into the Tune Select Menu and then press the or button to select "Local scan", then press the SELECT button to confirm, the display will show "Scanning . All the stations that have been found will be stored automatically, to explore the found stations, press the or buttons and then press the SELECT button when you find a station that you would like to listen to. To select manual tune, first press the MENU button to enter into the Tune Select Menu, then press the or buttons to select "Manual tune", finally press the SELECT button to confirm. Press the or buttons to move through the DAB channels, the display will show "5A to 13F" and their associated frequencies. DAB secondary services On some occasions you will see a ">" symbol directly after the name of the station, this indicates that there are secondary services available to that station. Press the OPEN button to open the CD door, insert the disc with the printed label side facing up and then close the CD door. The display will first show "READING" and then the total number of tracks on the disc and time. Press the /button to start playback from the first track, the display will show the current track number and elapsed time. To select a different track during play, press the I or I buttons until the desired track number appears on the display, then release the button, playback will begin from this track. To play the current track from the beginning during play, press the I button once. Press the REPEAT button to select the repeat play, to repeat the same track, press the REPEAT button once, the display will show " 1 ". To repeat the entire disc, press the REPEAT button again, the display will show " 3. To cancel repeat play, repeatedly press the REPEAT button until the repeat icon disappears in the display. During CD stop, press the RANDOM button to start random play, the display will show "RANDOM" and the tracks will be started playing randomly. During normal CD playback, first press the RANDOM button once, when the display shows "RANDOM", press the I or I buttons to randomly select playing another track. To cancel random play, press the RANDOM button again until the "RANDOM" disappears in the display. [. . . ] When the time to switch on the system is set, the display will show the timer on mode and flash, press the or buttons to select the mode (CD/FM/DAB), then press the TIMER button to confirm and the timer on mode is set 5. The display will show the volume level and flash, press the or buttons to select the timer on volume level, then press the TIMER button to confirm and the timer setting is now completed. SLEEP FUNCTION This function allows you to program the system to switch off itself after a set period of time. To activate the sleep function, repeatedly press the SLEEP button, the sleep time in the display will change in sequence on every press: When the display shows your desired sleep time, release the button, the sleep timer is now activated. [. . . ]