User manual MPMAN CSU 622

[. . . ] Do not remove any labels located on either the back or button cabinet of the unit. There is a white card in the CD compartment which is intended to prevent the CD pickup from moving during shipment of the product, Remove this card from the CD compartment before use. Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms. Batteries (not included) Open the battery compartment and insert eight batteries, type LR14, UM-2 or C-cells, , , , , (preferably Alkaline) with the correct polarity as indicated by the + and - symbols inside the compartment Batteries contains chemical substances, so they should be disposed of properly. [. . . ] Tune to required station by press BACK/TUNE DN or NEXT/ TUNE UP Manual Tuning: Press BACK or NEXT and then release within 1 sec. Auto Tuning: Press the play/pause button enter the automatic channel surfing mode, and to be put automatically sets. preset Channel:(FM 30 Preset memories) (1) Press BACK/TUNE-DN or NEXT/TUNE-UP Select desired station. (2) Press PROGRAM button once , The MEMORY number indicator begins steady in the display. (3) Press PRESET-UP OR PRESET DOWN buttons to select the desired number (4) Press PROGRAM button to save that station. Press PRE-UP or PRE-DN to start play the frequency that you selected . Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting. Turn off the radio by press FUNCTION button select other mode or press power button to off the unit. PROGRAM METHOD (1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode. This prompts the user to enter the first songs in the program PLAY list. (2)The user can select the desire tracks by using [NEXT], [BACK] keys. Once these keys are pressed, the Display will show the selected track. (3)After select the desired track, press [PROGRAM] key again and it will be stored in the memory. Mp3 Maximum 99 and CD Maximum 20 tracks can be programmed when Repeat steps (2) to (3) procedures. (4)If press the [STOP] key during the program mode, then the selected TRACKs will be stored in the memory and return to STOP mode (Continuous Play mode) (5)If press the [PLAY] key during the program mode, it will start the program PLAY mode. PLAY start from P01 Track Erasing a program You can erase the content of the memory by: - While playing, press STOP button twice. Press function selector to AUX, the sound source of the mp3 or discman or walkman will output from the unit. eN-6 EN-5 CD/MP3 PLAYER CD/MP3 Player Playing a CD/MP3 This CD-player can play Audio Discs , MP3 CD-R. [. . . ] -The unit don't support the HDD all and the portion usb with mp3 player. Note: at the mode of CD/MP3 / USB , the lcd will display the number of song or the song playing time. 8 Watt x 2 CD/MP3/USB playback does not work CD/MP3 / USB badly scratched/dirty Replace/clean CD/MP3 /USB (see maintenance) The CD/MP3 skips tracks CD/MP3 damaged or dirty Replace or clean CD/MP3 Headphone Impedance . This is to certify that CSU622PLL is in conformity with: Council directive 89/336/EEC(EMC direction): Applicable standards: EN55013:2001+A1:2003+A2:2006 EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2008 EN55020:2007 For more information please visit our website www. [. . . ]