User manual MPMAN CSD 60I

[. . . ] READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement. [. . . ] WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat. POWER SOURCE - The appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. POWER LINES - An outdoor antenna should be located away from power lines. Adjust radio frequency to your desired station by using the "TUNING" control. Press the "PLAY / PAUSE" button again when you want to stop playback temporarily. Select desired track by using the "SKIP +" or "SKIP -" button. Press the "PROGRAM" button again to confirm desired track into the program memory. Repeat step 2 and 3 to enter additional tracks into the program memory. Press the "PLAY / PAUSE" button to play the disc in the order you have programmed and the program indicator flashes. Press the "STOP" button twice to terminate programmed play and the program indicator will turn off. [. . . ] Repeat step 2 and 3 to enter additional tracks into the program memory. Press the "PLAY / PAUSE" button to play the disc in the order you have programmed and the program indicator flashes. Press the "STOP" button twice to terminate programmed play and the program indicator will turn off. [. . . ]