User manual MPMAN CSD 28

[. . . ] The following label has been affixed to the unit, listing the proper procedure for working with the laser beam: CLASS 1 LASER PRODUCT LABEL CLASS 1 LASER PRODUCT KLASS 1 LASER APPARAT LUOKEN 1 LAISERLAITE KLASSE 1 LASER PRODUKT The equipment contains a laser radiating laser rays according to the limit of laser product of class 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. [. . . ] RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat. POWER SOURCE - The appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. - To use the appliance with batteries, disconnect the AC power cord from it. Adjust radio frequency to your desired station by using the "TUNING" control. For CD disc - Total number of tracks is read and appears on the display. Press the "PLAY / PAUSE" button again when you want to stop playback temporarily. Select desired track by using the "SKIP +" or "SKIP -" button. Press the "MODE" button again to confirm desired track into the program memory. Repeat step 2 and 3 to enter additional tracks into the program memory. [. . . ] Repeat step 2 and 3 to enter additional tracks into the program memory. When all the desired tracks have been programmed, press the "PLAY / PAUSE" button to play the disc in the order you have programmed. [. . . ]