User manual MERIDIAN M80

[. . . ] Do not expose batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like. Directly on top of heat producing equipment, such as a power amplifier. On a soft surface, such as a carpet, which would obstruct the ventilation holes in the base. Changes or modifications not approved by Meridian could void the user's authority to operate the equipment. [. . . ] For information about setting up your product the way you want it see Adjusting the product, page 14. If you select the DAB band (where available) you will be prompted to scan for stations: Insert a CD in the slot, label uppermost, and gently push it into the slot until it is drawn into the drive: The radio will then tune to the first station found. Adjust the volume by turning the knob to the right of the product, or mute the sound by pressing the knob. Adjust the volume by turning the knob to the right of the product, or mute the sound by pressing the knob. These change function depending on what you're doing, as shown by the labels on the bottom line of the display. For more information about using the Radio see Listening to the radio, page 9. For more information about playing audio CDs and DVDs see Playing discs, page 7. You can then select one of the external inputs: Aux 1, Aux 2, i80, or Optical. You can adjust the volume between 0dB and 99dB in precise steps of 1dB, where 9dB is equivalent to doubling the loudness. The product includes an accurate alarm clock, which you can use to wake you up in the morning or remind you of an appointment with a tone, or the last radio station you were listening to. Before using the alarm you should set the clock to the correct time; see Adjusting the clock, page 14. In a similar way you can adjust the minutes, choose the source from Radio or Tone, and set the volume. At any stage press ¬ to return to the CLOCK menu with the settings you have chosen. Note: The remote control is supplied with a button cell battery already fitted; pull out the plastic tab to activate the battery. To step to the start of the next track You can also eject a disc when another source, such as Radio, is selected. The top left of the display shows the type of disc: CD (audio CD), DVD, or MP3/WMA, followed by the bit rate (44. Press [ or ] until the display shows the track number you want to play. As the disc is playing the display shows the track number (CDs) or chapter number (DVDs), and the elapsed time of the current track (CDs) or whole disc (DVDs). To repeat the current track To scan at faster than normal speed Each time you press the key the speed steps between 2X, 4X, 8X, 16X, and 32X, as shown UNHILL at top right of the display. BY MERIDIAN The display shows { or } followed by the track time: Press the S key to step between the following options: Track number and track time Play resumes from the point you reached. Many DVDs also provide a disc menu, which allows you to select additional sections or special options. Each time you press Angle the next camera angle is selected after a short delay. [. . . ] The SETUP SYSTEM menu allows you to use the product with your Meridian System. Set MSR(+) to Enabled to operate your product with a Meridian MSR+ system remote. Connect the Aux 1 input to the line output of an audio source, such as a music player, using a mini stereo jack plug. Connect the S-Video output to a display with an S-Video input, such as a television or monitor. [. . . ]