User manual MERIDIAN DSP3200

[. . . ] DSP3200 User Guide 2 DSP3200 User Guide EN Important safety instructions · · · · · · · · · Read these instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] · To avoid interference do not position the unit near strong electrical or magnetic radiation, such as near a power amplifier. Radio interference FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations. EEC: This product has been designed and type-tested to comply with the limits set out in EN55013 and EN55020. · · · · Copyright Meridian Audio Ltd Latham Road Huntingdon Cambridgeshire PE29 6YE England Copyright © 2010 Meridian Audio Ltd. Visit us on the Web: http://www. meridian-audio. com Part no: DSP3200 (P88394) This guide was produced by: Human-Computer Interface Ltd, http://www. interface. co. uk/ WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. This apparatus has been designed with Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding pin). The apparatus may be isolated from mains power either by unplugging the power connector from the rear of the unit, or by unplugging the connector at the opposing end of the power cord or cable from its supply outlet. As a result, either or both of these connectors should remain accessible CAUTION: This DSP3200 for use only with the Meridian DSP3200 Stand, part number SP5543. Use with other stands is capable of resulting in instability causing possible injury. EN DSP3200 User Guide 3 Unpacking The DSP3200 is supplied with the following accessories: · Power cord. NOTE: You should retain the packaging in case you need to transport the units. Connections The following diagram gives details of the connections on the base of the speaker: SpeakerLink input output Power Digital connections Use this connection SpeakerLink input To connect to this The SpeakerLink output of a Meridian Sooloos component, Digital Surround Controller, or Audio Core 200. The Speakerlink input of a second DSP3200 digital speaker, when daisychaining the speakers. SpeakerLink output SpeakerLink L/C R Digital Channel Selector Power Inlet Fuse Input Output Miscellaneous Switch Digital Channel Selector Description Set to L/C to use the speaker as a left or centre channel speaker. Set to R to use the speaker as a right channel speaker. 220-240V ~50-60 Hz 200W max Channel selector Standby indicator The status of the DSP3200 is shown by a green standby indicator on the back panel. Status Dimly illuminated Brightly illuminated Description Speaker in standby Speaker operating The speakers are switched on or into standby as appropriate via the SpeakerLink connections by the Meridian system they are connected to. DSP3200 User Guide EN Applications To connect a pair of DSP3200s to a Meridian Audio Core 200 The DSP3200s are ideal for a compact Audio Core 200 based system. · Connect the lower SpeakerLink output on the AC200 to the master DSP3200, using a Meridian SpeakerLink lead. · Connect the upper SpeakerLink output on the AC200 to the slave DSP3200, using a Meridian SpeakerLink lead. · Make sure the Channel selector is set to the L/C position on the back of the left speaker and to the R position on the back of the right speaker. DSP3200 ­ Slave MERIDIAN SPEAKERLINK INPUT OUTPUT Meridian Audio Core 200 SPEAKERLINK IN OUT DSP3200 ­ Master MERIDIAN SPEAKERLINK INPUT OUTPUT SpeakerLink lead SpeakerLink lead EN DSP3200 User Guide To use a pair of DSP3200s in a Meridian Digital Theatre DSP3200s are ideal as the rear loudspeakers in a Meridian Digital Theatre, in conjunction with a Meridian Digital Surround Controller such as the G68. [. . . ] · Connect the SpeakerLink output on the Media Core 200 to the master DSP3200 SpeakerLink input, using a Meridian SpeakerLink lead. · Connect the SpeakerLink output from the master DSP3200 to the SpeakerLink input of the slave DSP3200, using a Meridian SpeakerLink lead. For information on configuring your Media Core 200 please refer to the Media Core 200 User Guide. Media Core 200 NETWORK DSP3200 ­ Slave MERIDIAN SPEAKERLINK INPUT OUTPUT SPEAKERLINK OUT DSP3200 ­ Master MERIDIAN SPEAKERLINK INPUT OUTPUT Router SpeakerLink lead Internet SpeakerLink lead EN DSP3200 User Guide [. . . ]