User manual LUMISCOPE MODEL 1100

[. . . ] Your physician will tell you your normal blood pressure range as well as the point at which you will be considered at risk. 3 Blood Pressure Fluctuation Blood pressure fluctuates all the time!You should not be overly worried if you encounter two or three measurements at high levels. It is also influenced by season and temperature. Display Explanation Display: Systolic Pressure Icons: Appears when manual cuff inflation is needed Appears when manual cuff deflation is needed Diastolic Pressure Pulse Rate No. [. . . ] If the cuff pressure is not enough, an upward arrow ( ) will display and two short beeps will be heard to remind you that you should continue pumping. Sit still and wait for the monitor to deflate and measure your blood pressure. Upon completion of the measurement cycle, the monitor will display systolic, diastolic, and pulse readings and the unit will make a long beep. Measurement is now complete, and the reading is automatically stored in the monitor. Keep pressing the air release valve above the bulb until all pressure in cuff is released. If no button is pressed, the unit will shut off automatically in approximately one minute. 6 Recalling Memory 1. To recall stored blood pressure readings from memory, simply press the Memory button. Another press of the Memory button will recall the previous set of readings. All readings stored in memory will be displayed with its sequence number. Helpful Tips Here are a few helpful tips to help you obtain more accurate readings: · Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring. · Do not smoke or drink alcohol before measuring your blood pressure. · You should not be physically tired or exhausted while taking a measurement. · Do not take measurements if you are under stress or under tension. If you are feeling cold or hot, wait a while before taking a measurement. [. . . ] All implied warranties, including, but not limited to those implied warranties of fitness and merchantability, are limited to the total duration of two years from the original date of purchase. To obtain warranty service on your Lumiscope Blood Pressure Monitor, please contact the Lumiscope Repair Department at 1-800-672-8293 or visit www. lumiscope. net. Upon receipt, Lumiscope will repair or replace, as appropriate, this blood pressure monitor and return it to you. [. . . ]