User manual LOGICOM OLEA 552

[. . . ] You can download these instructions in pdf format at: www. logicom-europe. com OLEA 550/552/553 DECT telephone with answering machine and hands-free User manual Non contractual photo You must read this manual before using the device 1 We, LOGICOM 55, rue de Lisbonne 75008 Paris France Declare that the LOGICOM OLEA 550, OLEA 552 and OLEA 553 DECT telephone products with answering machine and hands-free are in compliance with the essential requirements applicable and in particular the requirements of guideline 1999/5/EC, which are as follows: Article 3. 1a - (protection of the user's health and security): - EN 60950-1/ A12:2011 Article 3. 1b - (protection requirements concerning electromagnetic compatibility): - EN 301 489-6 V1. 3. 1 (2008) - EN 301 489-1 V1. 9. 2 (2011) Article 3. 2 – (correct use of the radio frequency spectrum so as to avoid damaging interferences): - EN 301 406 V2. 1. 1 (2009) - RoHS 2 (2011/65/EU) We declare that the OLEA 550, OLEA 552 and OLEA 553 products are in compliance with the requirements related to European Standards for line interfaces. These devices are designed for use on German public switched telephone networks. This compliance applies as long as the product for which it is awarded is installed and used following the instructions provided in the user manual. Non-authorised modifications to the product cancel this declaration of compliance. [. . . ] Enter the menu and, using the DOWN key, select the menu "HS SETTINGS " Select "RENAME HS" "HANDSET" is displayed on the screen Delete the current handset name letter by letter ABC Use the alphanumeric keypad to enter the handset's new name. A beep confirms that the handset's name has been changed. 20 2 – Screen display You can choose the information displayed on screen when your handset is idle. Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "HS DISPLAY" Select "TIME" or "HANDSET NAME" to choose the display you desire for idle mode 3 – Key tones You can activate and deactivate the key tones. Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "TONE SETUP" Select "KEY TONE" Activate or deactivate the handset's key tones. 4 – Setting the automatic pick up/hang up function When this function is activated, it allows you to answer a call by simply picking up the handset from the base or charger, and to end a call by simply putting the handset back on the base or charger, without having to press keys and . Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "AUTO ANSWER" Activate or deactivate the handset's key tones. 5 – Activate/Deactivate the low battery alert When activated, this function allows you to hear a beep, indicating low battery. 21 Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "TONE SETUP" Select "BATTERY TONE" Activate or deactivate the handset's key tones. 6 – Activate/Deactivate the out of range alert When activated, this function allows you to hear a beep, indicating that the handset is out of range. Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "TONE SETUP" Select "OUT OF RANGE" Activate or deactivate the handset's key tones. 7 – Handset language There are 4 possible languages: English (default), French, Spanish and Dutch. To choose a language on the handset, follow the instructions described in chapter: "Installation and start-up guide – 3- Basic set-up – 3-4- Changing the language". 8 – Setting time and date Note: If you have subscribed to name or number presentation with your operator, the date and time of your telephone will be automatically updated by the network after every received call. 8-1- Choice of format Select the date display format You can choose to display the date in "DD-MM-YY " or "MM-DD-YY" format. Enter the menu and, using the DOWN key, select the menu "HS SETTINGS " 22 Select "DATE & TIME" Select "DATE FORMAT" Select a format. Select the time display format You can choose 24 hour clock format (e. g. "23H14") or 12 hour clock format (the time will be displayed as follows: "11H14 P" for "23H14" and "11H14 A" for "11H14" Follow the instructions above, selecting "TIME FORMAT" instead of "DATE FORMAT" 8-2- Date and time Enter the menu and, using the DOWN key, select the menu "HS SETTINGS" Select "DATE & TIME" Date setting: Select "SET DATE" 123 The date saved on the handset will appear on screen. If it is correct, press OK, if not you can modify it in the following order: Day/Month/Year using the alphanumeric keypad. Time setting: Select "SET TIME" 123 The time saved on the handset will appear on screen. If it is correct, press OK, if not you can modify it in the following order: Hour/Minutes using the alphanumeric keypad. A beep confirms the validation of the changes to the date and time. CAUTION: Time is set manually in the following order: hours then minutes, you can move from one figure to another using keys and . When setting the time, the telephone will not accept numbers of "23". If you wish to modify the time on your telephone from "15H00" to "20H00", you must change the second figure before changing the first, e. g. : "15H00" is displayed on the screen, Select the second figure from the hour section, "15H00" 123 Modify this figure using the alphanumeric keypad from "5" to "0". "10H00" is displayed on the screen, 23 x2 123 Select the first figure from the hour section, "10H00" Modify this figure using the alphanumeric keypad from "1" to "2". "20H00" is displayed on the screen, Validate the modification. This process must be used to set a time between "20H00" and "23H00" when the telephone displays a time between "14H00" and "19H00". 9 – Alarm If the alarm is activated, it will be triggered every day at the set alarm time. If the Snooze function is activated, when the alarm is triggered, even if you stop it, it will still be triggered every 7 minutes. Configuring the alarm function Enter the menu and, using the DOWN key, select the menu "HS SETTINGS» Select "ALARM" Activate or deactivate the alarm function 123 Enter the desired alarm time; a beep will confirm that the alarm is activated. "SNOOZE" is displayed on the screen Activate or deactivate the SNOOZE function, a beep indicates that the alarm time has been saved. appears on the idle screen, Advanced telephone settings For all handset settings, your handset must be idle (no tone) 1 – Setting the PIN code It is necessary to enter the PIN code to access certain functions. The default pin code is: 0000 WARNING: If you wish to modify the default PIN code, be sure to write down the new PIN code. Enter the menu and, using the DOWN key, select the menu "BS SETTINGS" 24 Select "CHANGE PIN" 123 123 123 "PIN?-----" appears on screen, enter the PIN code using the alphanumeric keys (the default PIN code is 0000) "NEW PIN? [. . . ] • Your telephone may interfere with other electrical equipment, e. g. televisions and radio sets, clock/alarms and computers if placed too close. It is recommended that you place your telephone at least one metre away from such appliances to minimise any risk of interference. There is a serious risk of explosion and/or release of highly toxic chemicals. 4 – Cleaning Clean the handset and the base (or charger) with a moist cloth or anti-static wipe. [. . . ]