User manual LG 55LB731V

[. . . ] ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. Visit divx. com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. [. . . ] yy Magnetic objects, such as speakers, may interfere with the camera’s operation. yy Install the product in a place with moderate temperature and humidity. yy Strong electromagnetic waves from other devices could interfere with the camera’s operation. The product and company names contained in this manual may or may not be registered trademarks or copyrights, and are only used for identification or explanatory purposes. All trademarks reserved. Overview ENGLISH ENG Microphones Lens Stand Activity Indicator Stand-Arm Stand-cable holder Stand-Bottom USB Cable 26 ASSEMBLING AND PREPARING Attaching the Video Call Camera 1 Unfold the stand and put it on the top center of the TV set. Video call camera NOTE yy For the best quality video and audio outputs, install the camera on the top-center of your TV. yy When using external speakers, allow sufficient space between the microphones and the speakers. yy Make sure to connect the Video call camera cable to the CAM port with the USB trident logo on the cable facing the front. ENGLISH ENG NOTE 2  end the stand of the Video call camera. Attach B the stand of the Video call camera to the back of the display with a Velcro Tape. yy For best results when using external speakers, only use the front right/left (stereo) speakers when using Skype. yy When making a video call with Skype using a PC, the Skype software version for Windows should be 4. 2 or newer. yy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy Supported HDMI Audio format : Dolby Digital, DTS, PCM (Up to 192 KHz, 32 KHz / 44. 1 KHz / 48 KHz / 88 KHz / 96 KHz / 176 KHz / 192 KHz) MAKING CONNECTIONS 29 ARC (Audio Return Channel) An yy external audio device that supports SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) port. When connected with a high-speed yy HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function. DVI to HDMI Connection ENGLISH ENG IN ( Audio in) AV2 (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box / PC Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. It does not matter which port you use. NOTE yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. yy When using the DVI/HDMI cable, single link is supported. 30 MAKING CONNECTIONS MHL Connection Component Connection ENGLISH ENG AV2 VIDEO IN COMPONENT PR PB Y AUDIO Mobile phone AV2 YELLOW (Use the composite video cable provided. ) GREEN (Use the component video cable provided. ) YELLOW WHITE RED RED BLUE GREEN MHL passive cable (*Not Provided) WHITE RED RED BLUE GREEN Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. (*Not Provided) NOTE yy Connect the mobile phone to the HDMI/DVI IN 4 (MHL) port to view the phone screen on the TV. yy The MHL passive cable is needed to connect the TV and a mobile phone. yy For some mobile phones supporting MHL, you can control with the magic remote control. yy Remove the MHL passive cable from the TV when: - The MHL function is disabled - Your mobile device is fully charged in standby mode L WHITE R RED RED BLUE GREEN AUDIO VIDEO DVD / Blu-Ray / HD Cable Box Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. NOTE yy If cables are not installed correctly, it could cause this image to display in black and white or with distorted colours. MAKING CONNECTIONS 31 Composite Connection Headphone Connection ENGLISH ENG AV2 VIDEO IN COMPONENT PR PB Y AUDIO OUT Ext. Speaker / H/P (*Not Provided) AV2 YELLOW (Use the composite video cable provided. ) RED WHITE YELLOW VIDEO Transmits the headphone signal from the TV to an external device. [. . . ] Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min :  0 to Max : 64 0 Ack [t][ ][Set ID][ ][OK/NG][Data][x] EXTERNAL CONTROL DEVICE SETUP 9 * Digital Terrestrial/Cable/Satellite [Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital) - 10 : Terrestrial TV (DTV) - 20 : Terrestrial Radio (Radio) - 40 : Satellite TV (SDTV) - 50 : Satellite Radio (S-Radio) - 90 : Cable TV (CADTV) - a0 : Cable Radio (CA-Radio) * Tune Command Examples: 1. Tune to the analogue terrestrial (PAL) Channel 10. Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analogue Terrestrial TV = 00 Result = ma 00 00 0a 00 2. Tune to the digital terrestrial (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Terrestrial TV = 10 Result = ma 00 00 01 10 3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02][x] [a][ ][Set ID][ ][NG][Data 00][x] Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) - 01 : Cable TV (CATV) * Digital Terrestrial/Cable Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 :  errestrial TV (DTV) – Use Physical Channel T Number - 06 :  able TV (CADTV) – Use Physical Channel C Number - 22 :  errestrial TV (DTV) – Don’t Use Physical T Channel Number - 26 :  able TV (CADTV) - Don’t Use Physical C Channel Number - 46 :  able TV (CADTV) – Use Major Channel C Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). [. . . ]