User manual LENCO TS-10

[. . . ] EN What's in the Box Main Unit Instruction Manual 3. 5mm to 3. 5mm Cable (For TV Headphone Output) AC Power Cable Design and specifications are subject to change without notice. [. . . ] 6 When removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord. Identifying the Parts Main Unit: Top View Rear View /SOURCE Select LINE IN 1 or LINE IN 2. 3 + VOLUME Increase or decrease the volume level. 1 4 LINE IN Terminal Connect to an external audio device. 5 AC~ Connect to a power source. 3 Connections Connect to TV This unit is very user friendly, please just connect it directly to TV's headphone jack as below : Connect Power Caution: - Risk of product damage!- Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. 1 Connect the LINE IN cable to: - LINE IN socket on the unit. Tip: You can simply use your TV's inherent Remote Control set to control Vol+/Vol-. Connect the AC power cord to: - the AC ~ socket on this unit. - the wall socket. Turn On/Off When you connect TV or an external device to the unit, unit will turn on automatically. Auto Power indication light is green (connect to LINE IN 1) or yellow (connect to LINE IN 2). And will turn red when disconnected or when you turn off TV / external device. [. . . ] Press standby button to turn the unit on. No Response From the Unit - Disconnect and reconnect the AC power plug, then turn on the unit again. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. [. . . ]