User manual LENCO TFT-711 QUICK GUIDE

[. . . ] Please be aware that new software may change the functionality of the TFT-711. Should you experience any difficulties with the operation of your TFT-711, please consult the relevant section of this manual, including the Troubleshooting, or alternatively call your dealer or customer service adviser. Do not cover the TFT-711's ventilation openings with items such as newspapers, tablecloths, curtains etc. Do not place naked flame sources, such as lighted candles, on the TFT-711. [. . . ] SEARCH: Manual search the last/next TV channel, Left cursor button search the last TV channel, right cursor button search the next TV channel. Booking: You can select the program, which want to book at the EPG menu. To move the menu list into focus, use the up/down cursor buttons You can enter the submenu list by pressing OK. To move the menu list into focus, use the up/down cursor buttons You can enter the submenu list by pressing OK. 3 Channel search When you want to search for channels, a channel search procedure can be performed in different ways at Search Type combo box: Auto Scan, Manual Scan and Scan By NIT. 2 Channel List It shows all the channels with information including number, name, bandwidth, quality, frequency, and strength. If you have several lists and want to make changes in them (News, Movie, MTV, Finance and Other), select which list by using the Mode button. Electronic Programme Guide (EPG) In the EPG you will find information about the programs for the current day and for the following seven days. (Provided that this information is included in the channel transmission from the distributor. ) You may also select the type of program you want information about, like Movie, Sports or Music. 4 Auto Scan: you can change the items of region (Europe, Australia), whether the update mode (Append or Replace) before you decide start search. LetterBox will give a complete picture, but leaves black areas at the up and down. Pan&Scan will fill up the screen vertically but cut some information from the left and right sides of the picture. PillarBox will give a complete picture, but leaves black areas at the left and right. Verticalcut will fill up the screen horizontally but cut some information from the up and down sides of the picture. Standard: When the TFT-711 is connected to the TV channels, you may need to select the correct TV standard system. 16 System Information When you enter the System Information folder, you will find general information about which hardware and software version your TFT-711 is running on, you can also find the signal information and battery information about TFT-711. 17 At the battery information option, you can also select display or close the battery indicated icon at top-right corner on the screen. Save mode In order to save power when the TFT-711 at portable state, the screen's brightness can be adjusted or turn off. 18 LEVEL: adjust the screen's brightness at 5 levels, 1 for the darkest, 5 for the highest, off for no save power. Close Screen at radio mode: set screen whether on or off when system at the radio mode. You can also quickly move to the different page options shown on any page by pressing cursor left/right. [. . . ] Use only specified peripheral equipment and interface cables; otherwise, problems may occur. Do not place your LCD in a location subject to mechanical vibrations or in an unstable location. Refer the online specifications to check the power operation of your TFT-711. Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder. [. . . ]