User manual LENCO TFT-360

[. . . ] - Do not put this television on bed, sofa, carpet, or on the surface of other similar object, in order to avoid causing the blockage of the notches and holes. - Do not put this television in a limited space, such as bookcase or embedded cupboard unless there is proper ventilation conduction. - Do not put this television in a limited space, such as bookcase or embedded cupboard unless there is proper ventilation conduction. -Please keep an interval of 10cm (4 inch) between this product and the wall. [. . . ] Plug the cable attached to the AC adapter into the DC in port on the TFT-360. Preparing the Remote Control Before using the remote controller, you need to insert the supplied battery in order to enable communication between the TFT-360 and remote controller. As with most other transmissions, bad weather affects reception quality. We recommend use the accessorial long antenna instead of short antenna when the signal isn't good. 2. 3 About the portable receiving antenna and accessorial antenna Use the antenna for UHF channels 21-69 for DVB-T, such as a directional antenna. If possible, place the antenna by the window and directed towards the TV transmitter. The strength of TV signal varies according to reflections from buildings or mountains. However, a wooden building is not a big barrier to digital TV signals. 2. 4 Connecting the TFT-360 to the TV Connect the TFT-360 AV input socket for video and audio. Connect the TFT-360 Headphone jack to the TV audio input socket for sound. 2. 5 Connecting the accessorial antenna and the external antenna. Align the telescopic antenna plug with the antenna jack on the TV set, and just plug in until its end. If you use the external antenna, unplug the telescopic antenna plug, plug the attached antenna plug into the antenna jack on TV set. 2. 6 Installing Stand Insert the front end of the support to the slot on the back cover, and then rotate the base as illustrated in bottom, until the support is locked properly. In order to storage remote control more expedient, insert the remote control to the slot on the back stand. 3. REMOTE CONTROL 3. 1 Definition This section describes how to operate the TFT-360 using the buttons on the remote control. FAV Mute 16:9/4:3 Mode To operate the favorite channels (DVB and ATV Function mode) Press once to turn the sound off/on (mute/ unmute). (DTV ATV and AV Function mode) Press this button open the mode menu and press again to shift between Digital TV Analogue TV AV , VGA and Multimedia. Audio channel: Left/right cursor buttons adjust the audio channel: Stereo, L and R Prefer Language: Left/right cursor buttons adjust the prefer language: English, German, Danish and so on. Audio Channel and Prefer Language menus only DTV mode and the program signal must contain. : You can select Country and the menu Language at the standard of local TV system. . In order to fit the person of different countries, the menu language can be set to different languages (English, Dutch, French, German, Italian, Portuguese, Spanish ) The default language is English. Here, you can set zoom mode and other too. Figure 4. 2. 3 Menu Language: Left/right cursor buttons adjust the screen: English, Dutch, French, German, Italian, Portuguese, Spanish . Zoom Mode: Left/right cursor buttons adjust the screen: 16:9, 4:3 Battery Information: right cursor buttons enter the battery information. IF the Machine charge battery, the Battery Information menu cant select. Select Country: Left/right cursor buttons adjust the screen: Germany, French, Poland, Portugal, Russia and so on Restore Default: Press the Left/right cursor buttons to enter next step, and press OK key to come back the factory default. If the machine turn on and used the outside power supplied or charge battery, the battery icon hide whenever on or off. If use the power antenna, please press the Left/right cursor buttons to ON. : (Only DTV mode) Under the Time Setting menu, you can set the time zone here in order to correct current time zone where you are. Figure 4. 2. 4 !Clock setting menu only DTV mode, : (Only DTV mode) To open this menu you will be asked to enter your access code. After set, the access code has to be entered before you can watch locked channels and change the password. Figure 4. 2. 5 :( Under the DTV mode) Under the search menu, when you want to search for channels, a channel search procedure can be performed in different ways at Automatic Search and Manual Search. [. . . ] Unplug the machine from the AC outlet if you are planning to not use the machine for a long time. Do not use any other AC adapter as it may cause a malfunction. 5. 5 Care battery 1. The battery design for only professional or Service Provider can open. Do not open or try to disassemble the battery cover on the back yourself. [. . . ]