User manual LENCO TFT-1021

[. . . ] Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. In order to ensure the reliable operation of this television and to prevent it from getting overheated, do not stop or cover these notches and holes. - Do not put this television on bed, sofa, carpet, or on the surface of other similar object, in order to avoid causing the blockage of the notches and holes. - Do not put this television in a limited space, such as bookcase or embedded cupboard unless there is proper ventilation conduction. [. . . ] Press to choose the line where Favorite Channel, move and delete, and press ENTER to set and cancel Favorite Channel, move or delete. After setting, corresponding figure will appear, as shown in Figure 3. Channel sorting Under the channel sorting, the channels shall be listed according to certain sequence so that the user can easily find them. It will pop up and dialogue box prompting that "Channel not available" when there are no programs in database to enter into, and it will not enter into channel sorting page. Before sorting, the type of sorting shall be set, including the following items: as shown in Figure 3. You can move the cursor to "manual search" via press under Installation menu, and then press ENTER to enter into manual searching page, under the searching menu, display the relevant parameters Freq (KHz) and Band Width. If any program is detected and the scanning process is finished, at the same time return and play them. Area Search Area search is a kind of intelligent and convenient mode of programs searching, which covers programs of all frequent points of target countries or regions. At present, this system covers many targets countries and regions including: Germany/ England/ Italy/ France/ Spain, etc. You can move the cursor to "Area Search" via press key under Installation menu, then press ENTER to enter into area searching page, as shown in Figure 3. 1 After entering into area search page, system will scan all programs one by one under frequency points of current countries or regions selected automatically. 3 If any program is detected and the scanning process is finished, system will exit the scanning page And save the program, at the same time return to the "installation menu" and to play them in a small Configuration provides individualized system setup function; you can configure the system according to your own hobby and demand. You can enter Configuration menu via the menu (MENU->Digital TV->Configuration), as shown in Figure 3. OSD Via OSD option setup, you can set the user interface display mode according to your own demand . Via the menu (MENU->Digital TV->Configuration -> OSD), you can enter OSD menu, as shown in Figure 3. When the cursor moves on the option in OSD menu, the values corresponding to this option on the right of the menu press to move upward and downward to choose the options in OSD menu. Time on OSD Option sets whether to display system time in full-screen play channel. Move the cursor to Time on OSD option, press to choose between ON and OFF. OSD Timeout Option sets some information hint dialogue box and displays time length, move the cursor to OSD Timeout Option, press to choose among 1-6 seconds. OSD Language option: The system has the user interface supporting a couple of languages; you can set language via OSD Language option: Move the cursor onto OSD Language option, Press to enter OSD Language List as shown in Figure 3. 1st audio and 2nd audio Language option: Press to enter the currently supported Audio Language list, in the Audio Language list, press to choose language, press ENTER to confirm; 2. TV TV setup provides convenient TV input mode, you can via menu (MENU->Digital TV->Configuration -> TV) enter TV set, as shown in Figure 3. [. . . ] Unplug the machine from the AC outlet if you are planning to not use the machine for a long time. The battery design for only professional or Service Provider can open. Do not open or try to disassemble the battery cover on the back yourself. While the battery is in use or being charged, the battery pack heats up. [. . . ]