User manual LENCO TFT-1020

[. . . ] LENCO TFT LCD DIGITAL AND ANALOG TV TFT-1020-User Manual For information and support, www. lenco. eu Warning Important Notes on Safety Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. Warning Electric shock, do not open Note: In order to reduce electric shock, please do not take off the cover. Please ask qualified maintenance personnel to conduct maintenance. This sign indicates that there is dangerous high voltage inside, and it is dangerous to contact any component inside the product in any form. This sign prompts you to pay attention to the attached important notes on the operation and maintenance of the product. The notches and holes inside the cabinet, on the back and at the bottom of the cabinet are designed to provide necessary ventilation. In order to ensure the reliable operation of this television and to prevent it from getting overheated, do not stop or cover these notches and holes. [. . . ] Start auto search (At Digital TV and Analogue TV mode) To confirm a selection. (At Digital TV and Analogue TV mode) AUTO Ok Menu /Exit Press to open the menus and press again to go back to the topper menu. Cursor up button, move up in the menus and change to the next channel in viewing mode. Cursor down button, move down in the menus and change to the previous channel in viewing mode. 0~9 LANG TTX INFO S. TIT L/R Press to change the channel and to select individual menu options. Press to enter Teletext (if available) (only Digital TV Mode) Press to display the information of the current programs. (At Digital TV Mode) Press to display the subtitle of the current programs. (only Digital TV Mode) Press to change the sound channel (At Digital TV) Or audio mode ( At ATV, AV and VGA mode). Press this button to display Electronic Program Guide (only Digital TV Mode) EPG 3. 2 Preparing the remote control Remove the cover from the battery compartment at the bottom of the remote control. Insert the battery, taking care to observe the "+"and "­" markings indicated inside. Attention: This remote controller's figure maybe different to the remote controller what you obtained. But the symbols and functions on the remote controller are the same as this figure. The remote control range is 4M or less within a±45° horizontal and ±5° vertical angle from the remote sensor. If the remote's battery is low, the remote may not function properly, so replacing the battery immediately is recommended. 4. Attention: The following describes the functions of your TFT-1020 while watching Analog TV and terrestrial digital TV. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted program information. 4. 2 Digital TV and analog TV 4. 2. 1 Menu summarize You can open the main menu by pressing Menu key at the remote control or front panel. And you can press mode key display mode menu, you can press up/down cursor buttons to select mode which you want with OK button enter. Display menu by pressing the Menu button; press the menu button again to go back to the topper menu. When menus are displayed, you can move the folders in horizontal directions with left/right cursor buttons. 4. 2. 2 Menu definition The Main menu includes following menu icons: , , , , , . To use the up/down cursor buttons You can enter the submenu list by pressing right cursor. Exit the menu list by pressing Menu. : You can select how the picture mode shall be sorted. There are four sort mode (personal, standard, dynamic and soft. ) are used here. Figure 4. 2. 1 Brightness Left/right cursor buttons adjust the brightness of the screen. Sharpness: adjust the sharpness of the screen. : You can select how the audio mode shall be sorted. There are five sort mode (personal, standard, music, movie and sports. ) are used here. Figure 4. 2. 2 Bass Left/right cursor buttons adjust the bass of the screen. [. . . ] While the battery is in use or being charged, the battery pack heats up. When the battery indicated iron on the screen flashes or when you have not used the battery for a long time, you need to recharge the battery. If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced. Please contact your dealer or Service Provider. 5. 6 About the headphone using 1. [. . . ]