Detailed instructions for use are in the User's Guide.
[. . . ] The product must not be exposed to dripping and splashing and no object filled with liquids such as a vase of flowers should be placed on the unit. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety. [. . . ] Com manuals search engine
Manual set Time
Press and hold the INFO/MENU button to find the <Main menu> and press ENTER, press / and press ENTER to enter the <Time setup>. Set clock> Press ENTER> 00:00(Hour:Minutes)> Press / to select the Hour digits> Press ENTER> Press / to select the Minute digits> Press ENTER to confirm. Set date> Enter the date 01-01-2014 (Day-Month-Year)> Use the above steps of SET CLOCK to select the digits, press ENTER to confirm. *If selected NO UPDATE, the time and date will not update from the system, and you should manually set the time and date. *If selected FROM RADIO, the time and date will auto update from the system if it detects the RDS signal. But if the RDS signal is not strong enough, the time/date will not update. When the <Alarm 1: off> appears, press ENTER to set the alarm ON, press / , it displays: Time: 00:00, then press ENTER. *Choose the Buzzer mode, when the alarm goes on, there comes a audible sound, press ENTER button, the alarm will goes on again 5 minutes later. Set the presets, this option enables the unit to turn on from the preset station or the last listened station if the alarm mode is FM or DAB with preset stations. Set the alarm volume level, press / buttons to increase/decrease the volume level, press ENTER to confirm. After all the above steps, enter the SAVE interface, press ENTER to save the alarm 1. To cancel the alarms, enter the alarm setting interface, press ENTER to select off, then enter the SAVE interface to save the alarm off setting. Com manuals search engine
Press the INFO/MENU button to check the information. In FM mode, it displays: Radio text, program type, signal strength, and date. In DAB mode, it displays: DLS information, program type, station name, date, frequency, bit rate & mono/stereo, signal strength, signal error. NOTE: DAB-unlike normal radio, groups together several radio stations and transmits them on one frequency. DLS (Dynamic Label Segment) Dynamic label segment is message the broadcaster may include with their transmissions, such as music style. Radio text As with DAB, the broadcaster can include the station text that displays the information about the current program. if radio text information is not available , it will display: No Radio Text. If the RDS (radio data system) is available, it will show the station information provided by the station. Com manuals search engine
DAB menu settings
Press and hold the INFO/MENU button, then press the the <Main menu> in DAB mode. / to enter
Prune the station When the radio has performed a scan in several locations, you may find there are some stored stations that no longer receive. [. . . ] Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. In case of professional use, all warranty obligations of the manufacturer will be voided. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. [. . . ]