User manual LENCO MES-221

[. . . ] Slave screen connector To the cigarette lighter socket 3 OPERATIONS PREPARATION Power on the TV set and select video input mode. When a menu screen appears on the TV, move the navigation buttons to select a preferred track number, then press the PLAY/PAUSE button to start playback. ADJUST THE VOLUME Press the VOLUME+/-button to increase or reduce the volume level. [. . . ] SKIP TO the NEXT/PREVIOUS PICTURE Press the NEXT button to skip to the next picture or the PREV button to the previous picture. f no key is pressed for a few seconds, it will skip to the next picture automatically. PICTURE ROTATIONS Press the RIGHT and the LEFT navigation buttons to rotate the picture Clockwise and anti-clockwise respectively. PICTURE FLIPS Press the UP NAVIGATION button to flip the picture vertically. PICTURE ZOOM IN/OUT Press the ZOOM button continuously, he picture zooms in by 125%, 150%, 200% or zooms out by 75%, 50% the original size. Press this button once more when the picture getting 50% size to return to the normal play. If the picture is enlarged, you may use the navigation buttons to view blocked parts of the picture. COLOR AND BRIGHTNESS ADJUSTMENT FOR THE LCD SCREEN) Press the SCREEN ON/OFF button on the remote control to adjust the color intensity and brightness respectively. Press and hold this button for a moment to open or close the TFT display. INITIAL SETTINGS Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are retained in the CPU of the player until otherwise modified. Use the navigation buttons to select the item you want to modify, press the PLAY/PAUSE button to confirm, setting page with further setting items displayed shows on the TV screen. Use navigation buttons to switch to another setting on the main setting page. GENERAL SETUP 1. 1 TV DISPLAY -it is used to select the TV scan mode, please set as per your TV set. Options: Normal/PS Normal LB Wide 1. 2 LCD MODE -it is used to select the LCD mode. [. . . ] You must set the PASSWORD MODE ON and then enter the password to enablethis selection. (DVD only -need disc software support) 4. 6 DEFAULT -Reset to factory settings. 5. PASSWORD SETUP 5. 1 Password MODE Options: ON/OFF 5. 2 PASSWORD CHANGE Option: Change Select to change password 6 TROUBLESHOOTING If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center Symptom Power does not turn on or suddenly turns off. [. . . ]